Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Cigarette (https://www.offshoreonly.com/forums/cigarette-32/)
-   -   Top Gun restore (https://www.offshoreonly.com/forums/cigarette/248002-top-gun-restore.html)

truetrini 02-21-2011 08:34 AM

Top Gun restore
 
Hi

I am assisting with the restore a '88 Top Gun to original spec and I need some help on the interior. Does anyone know where I can find someone who the templates that can fab the entire cockpit and cabin? The cabin and cockpit were ripped out a while ago and lost.

I know that it is probably easier to take to an upholstery shop but I want it done back to original. Once I have the pieces then I can take it to a shop to install.

Any help would be appreciated.

Ted G 02-21-2011 08:41 AM

PM Old School on this board. He is having his entire interior redone, some or all of the old interior may be available. It is factory original now but was damaged by moisture.

UrbanDisturbance 02-21-2011 08:42 AM

You need to call Cigarette. It may be a while before they call you back. Call every day for a week and leave messages. They gave me information on who had the patterns for the boat covers for my 1994 Cigarette Top Gun. Of course I have lost that information since then.

XT-Innovator 02-21-2011 09:40 AM

5 Attachment(s)
I have this boat in the shop now for interior job. Not sure if it is the same interior?

Going to be tough if the boat is overseas to get anything.

truetrini 02-21-2011 03:48 PM

Thanks Guys.

I PM'ed OldSchool and got a quick response. He is on vacation so he will follow up later.

I will see if I can get some pictures of the old setup and check it against yours XT.

I also sent an email to Bud at Cigarette to see if he can help.

OldSchool 03-03-2011 08:00 AM

5 Attachment(s)

Originally Posted by XT-Innovator (Post 3331941)
I have this boat in the shop now for interior job. Not sure if it is the same interior?

Going to be tough if the boat is overseas to get anything.

Not it, that is a pre-1987 Flat deck 38.


Originally Posted by truetrini (Post 3332261)
Thanks Guys.

I PM'ed OldSchool and got a quick response. He is on vacation so he will follow up later.

I will see if I can get some pictures of the old setup and check it against yours XT.

I also sent an email to Bud at Cigarette to see if he can help.

Here are some pictures of my '88 Top Gun cabin. Let me know if there is anything that I can help you with. My boat is in the shop right now getting the cabin completely re-done. I was hoping to get the project started earlier in the winter and planned to take it to PPI in FL, but had too long of a delay with the insurance $$$ arriving. A local shop here in Maryland is doing the work. I'm going to hold off on the cockpit upholstery until next fall and drag it down to Jim @ PPI.

OldSchool 03-03-2011 08:18 AM

5 Attachment(s)
Cockpit photos... A few from my boat and some others from the first Top Gun that PPI had done. Fantastic job by them!!!

truetrini 03-16-2011 10:43 AM

Thanks for the response guys. I have been traveling so I did not get a chance to catch up. The boat is in the Caribbean so I really need someone who has templates or has the same boat in the shop where they can take measurements. Maybe I will give the guys at PPI a call.

BLee 03-16-2011 11:37 AM


Originally Posted by truetrini (Post 3351704)
Thanks for the response guys. I have been traveling so I did not get a chance to catch up. The boat is in the Caribbean so I really need someone who has templates or has the same boat in the shop where they can take measurements. Maybe I will give the guys at PPI a call.

Try calling Fine Line Interiors: (954) 457-5565

The have done more Cigarette interiors than most, & have been around for a long time.

masi242 03-20-2011 09:57 AM

Oldschool when you bring it down to ppi you should put new bolsters in and sell me yours:drink:

OldSchool 03-20-2011 11:18 AM

3 Attachment(s)

Originally Posted by masi242 (Post 3354564)
Oldschool when you bring it down to ppi you should put new bolsters in and sell me yours:drink:

Why do you need Top Gun bolsters? Did you join the Cig Family? If so, congrats!

It's funny that you should ask. I have these (see below)in my garage and they are going in the boat as soon as I get it back from the upholstery shop. The ones that are currently are in the boat will be for sale, but (for some reason that I don't know the answer to) the seat bottoms have a piece of aluminum bolted across the bottom that prevents them from dropping down. Let me know if you are interested, the seats and stands will be for sale. :)


Craig

STRAIGHTPRIORITY 03-20-2011 07:07 PM

why are u changing them out? thought yours were the same style?

OldSchool 03-20-2011 07:21 PM


Originally Posted by STRAIGHTPRIORITY (Post 3354985)
why are u changing them out? thought yours were the same style?

Different stands. I acquired :cool: the ones pictured above and had them powdercoated. The seats that I have in the boat right now look the same....but the bottoms won't drop down. (See above)

I'm going to the shop tomorrow. I'll take some pictures of the bolsters that are in there now.

jaysflatdeck 03-20-2011 07:54 PM


Originally Posted by OldSchool (Post 3355004)
Different stands. I acquired :cool: the ones pictured above and had them powdercoated. The seats that I have in the boat right now look the same....but the bottoms won't drop down. (See above)

I'm going to the shop tomorrow. I'll take some pictures of the bolsters that are in there now.

would you sell ur old seats or the stands

STRAIGHTPRIORITY 03-20-2011 08:12 PM

your new ones are the same ones i have... just curious..

OldSchool 03-21-2011 07:08 PM

4 Attachment(s)

Originally Posted by STRAIGHTPRIORITY (Post 3354985)
why are u changing them out? thought yours were the same style?

Here are the photos of the stands/bolsters that are in my boat now. It'll be about three weeks before I get the new bolsters in the boat. I'll place an ad in the classifieds at that time for these seats and bolsters.

Craig :)

masi242 03-23-2011 08:04 PM

No, Not a TG owner yet still just a Formula guy with the standard seats, looking for a set of bolsters at a decent price. When you come up with a price pm me.

Thanks

mark

OldSchool 04-04-2011 08:34 PM

1 Attachment(s)
Before......

OldSchool 04-04-2011 08:36 PM

1 Attachment(s)
....and After!

STRAIGHTPRIORITY 04-04-2011 08:49 PM

looks awesome..

Biggus 04-04-2011 09:16 PM

Wow, what a difference.:drink:

Nice work, who did it?

OldSchool 04-05-2011 08:07 AM


Originally Posted by Biggus (Post 3368570)
Wow, what a difference.:drink:

Nice work, who did it?

Thanks Kurt. :)

Paymer & Phillips in Laurel, MD did the work. It turned out nice! Boat is at MDG Dave's now and I'll be ready to rock in a few weeks. When are you coming down?


All times are GMT -5. The time now is 10:11 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.