Offshoreonly.com - Check out the mods on this old 'Gun!

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Cigarette (https://www.offshoreonly.com/forums/cigarette-32/)

- - Check out the mods on this old 'Gun! (https://www.offshoreonly.com/forums/cigarette/261793-check-out-mods-old-gun.html)

Quote:

Originally Posted by delsol (Post 3501870)

Is the $3200 for both of them or per engine? Are they well suited to the vibration and moisture of the enviroment -- not famaliar with them.
I think they are a great idea and interested in using them on an upcoming build..

BTW --- Awesome job on the restore! The boat looks fantastic.

Dave

Thats for both, They are water resistant not water proof, 2nd time in the water we got trapped at the boat ramp in a down poor:eek: they got soaked and didnt miss a beat. As far as the abuse of rough water, LOTO is famous for rough water, and were running between the 22mm & 7mm all the time where it is the roughest. They have held up very well so far, there build for baja trucks and all sorts of desert vehicles so there pretty tough. Was a bit concerned about the size and being hard to see, after they were in-place that was not an issue at all! Deff. will ditch all gages and build a dash for race packs if I ever have another boat! Thanks! Mike

Saw the boat up close at Skaterfest...it
looks better in person! I wonder what Phil thinks?

Quote:

Originally Posted by omerta one (Post 3502949)

Saw the boat up close at Skaterfest...it
looks better in person! I wonder what Phil thinks?

:) :) :)

WOW ! Excellent build. I THOUGHT I just did a lot of work to my '87 TG. Now I realize I just scratched the surface. Beautiful boat.

A fiew videos from labor day

http://youtu.be/0PwQitB4gko

http://youtu.be/2ugeUI8zARE

http://youtu.be/OjhW2mmFgpo

Needs a little prop work but shes getting there...!!!:coolcowboy:

Quote:

Originally Posted by Midwest Customs (Post 3506554)

http://youtu.be/0PwQitB4gko

http://youtu.be/2ugeUI8zARE

http://youtu.be/OjhW2mmFgpo

Needs a little prop work but shes getting there...!!!:coolcowboy:

Here are more:

http://www.youtube.com/watch?v=5FyhL...eature=related

http://www.youtube.com/watch?v=osOYt...eature=related

http://www.youtube.com/watch?v=OjhW2...eature=related

Sick azz boat!!!:drink:

Hey Mike,

How did you do the rub rail? It's probably newbie question, but I'm curious how it's done. What's it made of? Did you just replace the standard Taco-type rail with fiberglass and paint it?

Sweet boat by the way...

Stan

Hey mike,

Where did you get your drive and tab trim gauge? I have seen them before but can't remember who makes them!!

Some sick videos too! That boat is really amazing!!

Thanks
Jim

Quote:

Originally Posted by svonmiller (Post 3506988)

We had to cut skinny strips of wood and tack in place, then glass it together and some putty to make it smooth... sounds easy huh? :lolhit: (probably well over 150hrs in the rail and vent/cleat elimination)

Quote:

Originally Posted by 502ss (Post 3507719)

Hey mike,

Where did you get your drive and tab trim gauge? I have seen them before but can't remember who makes them!!

Some sick videos too! That boat is really amazing!!

Thanks
Jim

Got them and most all the parts through CP performance, Great people and usually great prices. My shop is set up with CP so we get some great pricing through them! Let me know when your ready to order and ill see if I can save ya come coin.:drink: Thanks! Mike