Offshoreonly.com
Page 4 of 7
« First
2
3
4
5
6
Last »
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Cigarette (https://www.offshoreonly.com/forums/cigarette-32/)
-   -   1973 28 (https://www.offshoreonly.com/forums/cigarette/284747-1973-28-a.html)

dreamer 09-16-2012 05:30 PM
Best I saw with labbed props was 69

Nuwave has a trade in deal where u can trade in the tired 350 mpi for carb 357

That will put her at 72-74

buck183 09-16-2012 07:53 PM
Originally Posted by cfischer (Post 3777631)
Guess I'm wrong! Sorry I thought Ted told me in Miami that he was sending them to his guy in Cleveland??? My bad Buck! Hope all is well and you're having a good season.

CJ
All good my man, all good. To be honest, I was hoping you were right. :)

Had a great season with her. This boat has turned out to be far better than I had imagined when I committed to it. I honestly thought I was settling when I purchased it. The end result couldn't be further from my initial thoughts. She does some amazing stuff for her age and power.

There's a few little things eating at me about her cosmetics. Hoping to make some upgrades to her for the next owner to appreciate. Gonna see in the next couple months if my ideas work out or not.

For the record, I think I may still owe you a meal or possibly a few drinks. Next time we cross paths you have credit with me. ;)

Buck

THEJOKER 09-16-2012 08:18 PM
Originally Posted by slpcamaross97 (Post 3777561)
For sale?
Nah I'm going to hold on to her. It's in storage for now.

CignificantOther 09-17-2012 03:55 PM
Originally Posted by hop116 (Post 3776675)
If i am not mistaking with the higher x dim. this is going to put my exhaust above the rub rail correct? I plan on using SM exhaust. the boat currently has some type of log manifolds on it currently that litterally goes straight out of the back.
Yes, I had dry SM risers out the cap, over the rub rail. The flared area of the hull, under the rub rail, was modified/removed at the factory to allow the top of the TRS transom assy to mount even with the bottom of the rail.

I'll try to find and scan an old picture.

hop116 09-17-2012 06:49 PM
Cool! I think that looks pretty cool. That is the route i want to go.

RebarBox 09-17-2012 07:05 PM
Originally Posted by buck183 (Post 3778000)
There's a few little things eating at me about her cosmetics. Hoping to make some upgrades to her for the next owner to appreciate. Gonna see in the next couple months if my ideas work out or not.
Do I need to prep my shop?

buck183 09-17-2012 07:57 PM
Originally Posted by RebarBox (Post 3778639)
Do I need to prep my shop?
Not yet. I'm leaning towards the other side of her right now.

Buck

Prostreet144 09-17-2012 08:02 PM
Originally Posted by hop116 (Post 3778629)
Cool! I think that looks pretty cool. That is the route i want to go.
You should do something cool to the front of the boat. I want to see something nice when I turn around and look behind me when I'm WOT!! Post some pics already before you yank the engines. I might swing by Wed evening if your working on it.

hop116 09-18-2012 05:48 AM
LOL! We will see!

Prostreet144 09-18-2012 08:59 AM
Posted for HOP

http://i62.photobucket.com/albums/h1...006/photo5.jpg
http://i62.photobucket.com/albums/h1...6/photo4-1.jpg
http://i62.photobucket.com/albums/h1...6/photo3-1.jpg
http://i62.photobucket.com/albums/h1...006/photo1.jpg
http://i62.photobucket.com/albums/h1...6/photo2-2.jpg


All times are GMT -5. The time now is 05:56 AM.
Page 4 of 7
« First
2
3
4
5
6
Last »
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.