LED Bilge Lighting
 

Looking to install bilge lights in my 05 Gun. I want quality and for it to look like it was a factory item. And where to wire them to?

Just ordered a kit from LEDGlow, i have a Cig mystique, got 6 2' tubes and wiring $149, which is plenty for my mystique, its a nice kit everything sealed, all the tubes have 2 sided tape on, each tube has a male and female water tight plug on them so you can plug as many tubes together as you want, and then has 2 plug in power cables....they have a 8 2' tube kit which would be better for your gun...here's the site http://www.ledunderbody.com/

Here is my 2005 39 Top Gun Unlimited... I did in blue from Custom Dynamics.

Dude be the envy of your friends!!:

http://xkatiewilliamsx.files.wordpre...light-bulb.jpg

Stingerz from Custom Dynamics

Me too. I haven't gotten any photos yet of my engine compartment, but here is my cabin...

What size did you guys use from custom dynamics? What size? What did you use on your cabin Old School?

In my cabin, I used seven of the 39 inch Stingerz from Custom Dynamics. 39 inches long and 99 LED's on each one. Overkill, yep. It looks like a phucking tanning bed in there!! :D

I used 3 of the 39 inchers in the engine compartment. One on the front and one on each side....

They only come in 39" long pieces... I installed 5 in my bilge, staggered set up so sides are two spliced together.

Pat

I don't have any pix of them lit yet, F'in damn boat still isn't finished :angry-smiley-038: but I used Sea Master 20" strips and used 8 in the bilge.

Really nice product, totally sealed with heat shrinked pigtails and USCG fire rated...not that it really matters, but it was extra piece of mind.