Offshoreonly.com
Page 4 of 4
« First
2
3
4
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Cigarette (https://www.offshoreonly.com/forums/cigarette-32/)
-   -   New old School back seat and hatch cushions for Flat Deck (https://www.offshoreonly.com/forums/cigarette/292748-new-old-school-back-seat-hatch-cushions-flat-deck.html)

MrCIG 04-01-2014 09:45 PM
2 Attachment(s)
New spring loaded latches. Should be easier then the old wedge bars

sonic700 04-01-2014 10:28 PM
I would like my moving blanket washed before returning it. Looks like you spilled a bunch of stuff on it.
Thank You

MrCIG 04-18-2014 06:59 PM
6 Attachment(s)
All installed looks great

ICDEDPPL 04-18-2014 09:51 PM
I love those drop down bolsters.. one day I`ll have me some of those drop downs so I can sit down.. one day

sonic700 04-18-2014 09:57 PM
They are very easy to be made. Just need to know the right person. :whistle:

ICDEDPPL 04-19-2014 11:04 AM
I bought hinges and made some bases out of aluminum , I`m half way there.

dammmagnum 04-19-2014 01:19 PM
Mark,

Did your Flat Deck come with the Fairing already on it or did it have a windsheld on it and you replaced it? Looking at a 85 Flat Deck with a windsheld and looking to see how much work to replace it.

The interior is looking great , Nice job putting it back together

thank you
Jim

scippy 04-19-2014 08:05 PM
Jim ...............sounds like your in the market for a flat deck........good for you!

MrCIG 04-19-2014 09:06 PM
Originally Posted by dammmagnum (Post 4109112)
Mark,

Did your Flat Deck come with the Fairing already on it or did it have a windsheld on it and you replaced it? Looking at a 85 Flat Deck with a windsheld and looking to see how much work to replace it.

The interior is looking great , Nice job putting it back together



thank you
Jim

Mine came with the fairing. Mine has been modified from factory but it is original

Mark

MrCIG 04-19-2014 09:08 PM
Originally Posted by ICDEDPPL (Post 4109080)
I bought hinges and made some bases out of aluminum , I`m half way there.
How you going to staple the vinyl on to the aluminum?

Mark

Xtreme Air 04-20-2014 08:34 AM
Originally Posted by MrCIG (Post 3882659)
After 25+ years vinyl was starting to get brittle and seams were splitting and a little wood rot. It was time for a face lift. Found the original material on line and a local guy that was reasonable on price and stuck to his schedule.
The Seats look Great. I am not too far off fro having min done. Great work!

dammmagnum 04-21-2014 01:35 AM
Originally Posted by scippy (Post 4109201)
Jim ...............sounds like your in the market for a flat deck........good for you!
Pete,

Happy Easter

I still really need to find a new Job first , but there are some nice deals out there
Thank you
Jim

Doug 04-21-2014 05:48 AM
Really looks nice Mark.

ICDEDPPL 04-21-2014 03:14 PM
Originally Posted by MrCIG (Post 4109231)
How you going to staple the vinyl on to the aluminum?

Mark
Yeah thats what I wanna know! Some wood base on top? Then you bring it to a guy and how is he going to know what size to make the cusion ? Bring him the whole seat? Its held on by like 70 stripped phillips head screws. F-that!
Screw it.. its way down on my list.
I`ll sit vicariously thru your seats :D


All times are GMT -5. The time now is 07:13 AM.
Page 4 of 4
« First
2
3
4
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.