1988 31 ft bullet
 

I've started restoration of this and found that some of the hydraulics, links and levers that are supposed to raise the sun pad over the engine compartment aren't there. Does anybody have any diagrams or info on what should be there to make it work?

PM me your e-mail and I will send you the wiring diagrams I have. You have a switch on the dash which operates a pump under the rear seat, port side. Hydraulic lines run from the pump to the cylinder that raises the hatch.

I have the pump and cylinder working but I can't rig it to the links I have to fully raise the pad/cover. I think there must be something missing but I don't know what it is.

I will get a couple of pictures and post them for you.

Post some pics we might be able to help you better.

Not like he^^^^ has ever rebuilt a Bullet LOL

Thanks eightsecmopar.

[ATTACH=CONFIG]506722[/ATTACH][ATTACH=CONFIG]506724[/ATTACH][ATTACH=CONFIG]506722[/ATTACH][ATTACH=CONFIG]506724[/ATTACH]Hope this helps

Sorry for the :hijack: but was looking at the pics, the 2nd and the 4th pic have a little it looks like a roller on the top of the arm, that rolls in that slotted c chanel, did all the cig hatches have that?? when I took mine apart it just had a pin in there...

I have a whole arm assembly with the hydraulic piston if interested