Cig 20 Engine Hatch
 

Anyone have or know of a spare Cig 20 raised hatch that's available? Mine has the original flat hatch that had a scoop added. Starting the resto and finding it may be easier to replace vs. try and rebuild.

Could also use a front storage hatch and the push & twist latches (4) as well.

Thanks!

Update.... HUGE thanks to intotwins. We have the engine hatch situation taken care of.

Now, where do I find these without the "Donzi" logo? Anyone have 4 lying around that need to be put to use?

https://www.donzidirect.com/classic-...tch-latch.html

Not sure what the 'front storage hatch' looks like but can you just install a small hydraulic closure with just a simple pull lever?

Nah, don't need a lift cylinder and already have the lift handle. It's the 1/4 twist hold down hood pin latches that I need. They mount on the corners.

LipShip had a Used raised hatch hanging on the wall in his showroom last time I was in there (early Summer)
you can see it in the upper righthand corner on this pic

I've been working on my Cig 20 resto for the better part of the last year, and went absolutely nuts trying to find these without the Donzi logo! Wish I could help, but I still haven't found any. I was lucky enough to find my old ones hidden away in a box, but not in the best condition. I'm also looking for 2 more of the hinges as I only saved 2 of the 4 sets. I've been meaning to give a call down to lipship, and I'll gladly let you know what I find out!

-Derek

Not 100% sure if they are the same but my 1972 Olds 442 hood had those same pins and also the old 68-69 Shelby's also had them.

Yes. I talked to Phil last week. It's still available if anyone needs it. But for me intotwins has fixed me up!

Pretty close match. I searched on those last night like you suggested and came up with some potentials. THANKS!