Originally Posted by Full Whack (Post 4058777)

Got the check from the marina today, finally some closure on all of this..

Originally Posted by Full Whack (Post 4058777)

Got the check from the marina today, finally some closure on all of this..

Originally Posted by Full Whack (Post 4058777)

Got the check from the marina today, finally some closure on all of this..

Originally Posted by glassdave (Post 4058647)

True dat :cool:

At the end of the day your only talking maybe a couple hundred in savings going with outdoor pine over marine fir. Marine fir is much easier to work with, denser and easier to round over plus it does not seem to warp and move around like pine while your working with it. Pine also has oils that do not necessarily like lamination. I'm not gonna say that i have never used big box stuff in the past but that was long ago and not on customer stuff, you can use it but it doesn't make sense on performance stuff. Here in Toledo we have a high end cabinetry lumber place that sells marine fir for right around a hundy a sheet for 3/4, it just isnt worth the savings to use anything less.

Originally Posted by MILD THUNDER (Post 4206186)

:nicethread:

Originally Posted by 88bullet (Post 4058328)

http://www.syracuse.com/news/index.s...fs_patrol.html

this is one of the funniest articles ive read in a long time