|
the only one i know that is curved is the one on the back of spirit of apache. every other one i have seen is just flat. i think they started with 4 inch and milled it down to fit the crown of the deck. that might get expensive for material lol
|
How much $$ are you talking to do this stuff like footrests, etc..? Not materials, just strictly a machining and labor cost?
|
it varies with how indepth of a design you want. got an idea?? shoot me a pm with what your thinking and i can get you a price quote. just need size of what you want done and a quick sketch on a napkin of the design you want and can shoot you a quote
|
Originally Posted by frickstyle
(Post 4076262)
Are the new ones curved to match the curvature of the transom? If you look at the rub rail, it has a rise to it. not sure if they contour the platform to match, or if it;s a flat piece of plate/billet. I will look around the shop, and make a few phone calls for estimates...
http://33outlaw.zenfolio.com/img/s8/...58888622-4.jpg |
That's a nice looking platform. How much?
|
Its not for sale but thanx for asking!
:D ...... $2500 $200 side steps $300 shipping Westcoast Offshore |
7 Attachment(s)
Here are some pictures of the Blue One on the Top Gun
The Red One I had Fabricated for the Mistress and I also had a white one made for the Sonic. DO NOT BUY A WHITE SWIMPLATFORM if you have Thru Hull Exhuast. Tuff to keep clean |
Not too derail the thread but I wish Offshore had a anti slip as an option... on my boat you slip on the race hatches and its a slip and slide right on top of the props. :eek:
http://33outlaw.zenfolio.com/img/s10...61770482-3.jpg |
1 Attachment(s)
were shooting for a billet platform. not a tubular one at all. kinda like this one
[ATTACH=CONFIG]518836[/ATTACH] |
How about some fender holders? Seems like someone could do better than $400 for a dual
|
| All times are GMT -5. The time now is 11:10 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.