A little boat BLING
#101
Registered
I am not the original guy who was making these, so no license plate from me.
I am setup to make 16pcs, 4 for me. Counting the two who showed interest, 12 are spoken for. I can just as easily make 20 if needed. No clue on price, but I will be fair.
I am setup to make 16pcs, 4 for me. Counting the two who showed interest, 12 are spoken for. I can just as easily make 20 if needed. No clue on price, but I will be fair.
#104
Platinum Member
Platinum Member
iTrader: (6)
5sonboxes made the plates and he isn't doing them any more, but I have one that I'll sell for 1,000,000.00
#105
Registered
Join Date: Jan 2016
Location: Northwest - Arkansas
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Frickstyle - It looks like you tried posting a message about the latches but nothing is showing up. I tried to PM you and received an error message that your inbox is full. How did they turn out? Pics?
#106
Registered
They came out good, but I think we missed something here. We may have to modify what we have because in the "closed" position, the latch doesn't stick above the swing bolt shoulder portion of the fastener. I'm going to see if we can save these. I didn't realize that until I posted the picture, and I then confirmed it this weekend when I put them in the hatches. You may be able to see what I'm trying to explain here:
[ATTACH=CONFIG]556973[/ATTACH]
I'll update this post when we have a green light. I still have you on my list for the first set or two.
[ATTACH=CONFIG]556973[/ATTACH]
I'll update this post when we have a green light. I still have you on my list for the first set or two.
#107
Registered
OK, these should work now. Looks like the latch will work in the closed position. I could never recoup my cost on these, but since I was running them, we made a few extra for people who needed them. Just trying to help out.
You will need to supply or re-use your old washers, I do not have them. The correct assembly would be 1/4" - stainless washer + rubber washer + stainless washer.
[ATTACH=CONFIG]557014[/ATTACH] [ATTACH=CONFIG]557015[/ATTACH]
$35.00ea, or qty 4 - $125.00
I have 3 sets to sell, there are already two people that have interest, so PM me if interested and I'll let you know. Also, these are not perfect, a couple came out with tooling marks (see picture). I am losing money on these, so therefore, all sales final, no complaining.
[ATTACH=CONFIG]557016[/ATTACH]
JJ - do you still need some of these?
You will need to supply or re-use your old washers, I do not have them. The correct assembly would be 1/4" - stainless washer + rubber washer + stainless washer.
[ATTACH=CONFIG]557014[/ATTACH] [ATTACH=CONFIG]557015[/ATTACH]
$35.00ea, or qty 4 - $125.00
I have 3 sets to sell, there are already two people that have interest, so PM me if interested and I'll let you know. Also, these are not perfect, a couple came out with tooling marks (see picture). I am losing money on these, so therefore, all sales final, no complaining.
[ATTACH=CONFIG]557016[/ATTACH]
JJ - do you still need some of these?