Cafe Stringer Layout
 

Does anyone have a diagram or pic of the stringer/compartment layout on a Cafe under the cockpit floor?

I found the ~2'x2'x10" compartment under the helm/steering wheel that holds the macerator pump/plumbing was not draining into the bilge. I siphoned it out and found the drain was not blocked, but appeared to have water in the compartment under that. Need to find the drain hole to remove debris/unclog.

Thanks.

if its like my Mistress there is a 4-5 bulkheads under floor.....good luck...

yup. my floors off right noww send me a text and ill snap some pics for you right now. 3152473146

Txt sent. Thanks. I was just about to go to Home Depot and buy an inspection camera....

[ATTACH=CONFIG]524282[/ATTACH]

Thanks for the pix Dmax. Posting here for others in the future....

[ATTACH=CONFIG]524351[/ATTACH][ATTACH=CONFIG]524352[/ATTACH]

Looks like his project turned into a little more.....

C'mon don't turn this thread. He actually did something useful without being a cocky prick. Feel free on the other thread lol

I'm not lol just saying...

Is the whole floor removeable on a café? my Mistress I can remove center but would have to cut around edges...

I thought it was the center and 2 other small panels. 315 did some cutting or I haven't paid close enough attention

hope I never have a reason to cut mine lol

L'll Red , judging by the pictures it would appear that the floor was removed not cut . I see a lip that would support the floor around the perimiter . I wish my Flat Deck was like that.
Rick G.

why didnt i think of getting something like this.. Im replacing the hoses and pumps in my head but would like to maintain the tank if its not corroded. This is an awesome way to see if it is without removing it :D Home depot for me on the way home...

I bought it this morning. $100. Using it later today to see where the clogged drain hole is.

whole floor comes up just screwed in place and seals at the seem had mine up to inspect the tank and reseal aft all the years of use

I picked one up as well... Now I have to find time to examine the tank.. haha I have all the new pumps, y valve for the replacement. this is the last step.. Every time I say Im going to get to work, its a nice day and I take the boat out.. lol