offshoredrillin

Ever since I got my Tiger I always wanted to do more with it, today Fed ex brought another piece of the puzzle 4.0 liters... cant wait to see what the old straight bottom does now... SCX's and new transom assemblies are coming as well... I'll post pics as things progress as well as engine numbers. Dave at MDG performance is handling all the build and rerig as I have to work to pay for it

Biggus

iTrader: (1)

Very nice! I bet that will liven it up a bit!

jbraun2828

Whipples and new drives in the same year, you better get to work haha. Congrats, going to be like a new boat

cigboat1

Cmon Drillin,Your putting that on your Yugo , tell the truth now !!!! Ha,Ha,HaHa........They look really good wish I could afford to do that now Jim

Quinlan

iTrader: (1)

Very Sweet!!

drpete3

4.0 sweet

offshoredrillin

Thanks all, When Dave and I came up with the formula for my engines, we were at near 640 hp and 670 tq on 87 octane... 509's with afr 335's and a 741 cam with dual plug swap, best of 82.9 with that set up. Should put up some impressive numbers on 93. I'm using the xr lowers and having them done by Wilson. it's going to be fun to see where it ends up HP wise and speed wise... I was going to paint from the rub rail up this year but between this and glassdave finishing my 20, I'm going to hold off on paint till next year, that way with all the rigging and such I can dial it in and not have to worry about scratching fresh paint...

Relaxing

What motors are in it now, and what kind of speeds did it run. Looking forward to seeing the progress and the finished product. Good luck, and nice ride in the background.

seafordguy

Is that a 430. In the background rob?

jawbreakerkid

Cool project Rob! Those 4L's should put a little more crack in that throttle!