![]() |
Originally Posted by sonic700
(Post 4398190)
Dan Who's doing your hull bottom. Side note mine is still up for sale
|
Never heard of that place. Hopefully you get the results you want. Thanks dan
|
Originally Posted by J-Bonz
(Post 4398239)
What's next Ryan ?
|
Originally Posted by ICDEDPPL
(Post 4398237)
That`s good to know Russ, mine has quite a hook, I`m hoping for your kind of results.
Ryan: http://bowkersfiberglass.com/directions.htm Lots of custom stuff on Ryans boat , I`m sure if anyone takes a look at it the sale won`t be far away, good luck champ. |
TD Custom Dave likes him and I`ve read good things online.
Last TG he blueprinted the bottom and cut back the strakes and it gained 6mph. That water breaks before the helm on mine, that hook is pushing the bow down quite a bit. Hook needs to go! |
Besides the hook, props, type and rotation plus your X will make huge difference on how you carry your bow.
One thing I'll say is don't throw money at that till you work out your hook.. I have always wanted to try on a set of boxes. |
I`m on boxes, even with bottom, tried both in and out rotation. Not saying it`s all the bottom but we`ll see.
http://33outlaw.zenfolio.com/img/s2/...67072382-3.jpg That`s a lot of light shining through |
You need to keep the Reverse spoiler slowing you down so I can keep up. That is a bit of light
|
I sure have seen worse but that's not doing you any favors. Memory serves correct if your X is even then you raised it, maybe your lost some leverage on your bow.
I think when Mark put his Conrads on he played around with his X dimension. Possible he can advise what he found. |
|
Originally Posted by Flat Deck Russ
(Post 4398372)
I sure have seen worse but that's not doing you any favors. Memory serves correct if your X is even then you raised it, maybe your lost some leverage on your bow.
I think when Mark put his Conrads on he played around with his X dimension. Possible he can advise what he found. |
Hey Dan I was just looking at your picture of the bottom hook . There is another way to eliminate the hook , do what I did put a 9 1/2 inch notch in the hull . Bet it will eliminate most of the problem and it's real easy to do . Lol.
RG. |
That`s great idea Rick, I`ll get me sawzall..
|
Originally Posted by Flat Deck Russ
(Post 4398018)
Come on Mark........ you couldn't get the sweat equity out of her in this market. Besides with the gas prices this year its time to burn some up! Hell you might even see back down in Chi-town this year for a weekend or two.
You guys forgot another flatty in town. |
So did the Flat Decks pulled from a certain mold all have a hook or whats the story there or were they all from the same mold? Is it only something to be worried about if you believe it indicates a structural problem or if your trying to squeeze the last few mph out.. Probably creates some weird stern lift if severe enough..?
|
Fiberglass shrinks, nothing to do with a mold. not uncommon for new boats to have bottom issues / hook. Also how the boat is supported on trailer makes a difference.
Some smaller boats have em built in on purpose to act like a tab. Doesnt make too much of a difference below 70mph. |
Understood, thanks for the insight.
|
Originally Posted by ICDEDPPL
(Post 4398361)
I`m on boxes, even with bottom, tried both in and out rotation. Not saying it`s all the bottom but we`ll see.
http://33outlaw.zenfolio.com/img/s2/...67072382-3.jpg That`s a lot of light shining through |
Dan
It looks like the picture is taken outside the lifting strake. If so that should be out of the water at high speed. |
Measurement is about 5" up from the pickup. You can see the bottom trailer bunk (missing in pic)
http://33outlaw.zenfolio.com/img/s7/...27261669-3.jpg |
http://detroit.craigslist.org/mcb/boa/5434086729.html anyone see this one? seems like a fair price?
todd |
Originally Posted by baronmarine
(Post 4403124)
http://detroit.craigslist.org/mcb/boa/5434086729.html anyone see this one? seems like a fair price?
todd Throw your 575s in that would be a hoot. |
Still trying to sniff up the right boat. Budget is between 40-50k... Whatcha got?
|
I got a $120, 000+ Flat deck that`s worth $60K :lolhit:
|
Originally Posted by ICDEDPPL
(Post 4404943)
I got a $120, 000+ Flat deck that`s worth $60K :lolhit:
I dont know weather to lol or cry but I will tell you it looks like a million bucks!! Damn fine vessel man! Fu!$ing thing sounds sick on YouTube! Can't imagine the melodies in person! |
Originally Posted by tommymonza
(Post 4403133)
Todd you should buy that just so I don't have to drive your boat when I am up there. Always good to have a emergency back up hot rod.
Throw your 575s in that would be a hoot. todd |
Not associated with this boat at all, but you could be in a newer machine, by about 10 years in that price range. http://www.powerboatlistings.com/view/41014
Looks decent for short money. Bet you could make a quick deal on it. Top Gun Resale a little higher, bigger cabin. Just a thought if it passed a survey and the sea trial. Could be sweet |
Originally Posted by cigrocket
(Post 4405060)
Not associated with this boat at all, but you could be in a newer machine, by about 10 years in that price range. http://www.powerboatlistings.com/view/41014
Looks decent for short money. Bet you could make a quick deal on it. Top Gun Resale a little higher, bigger cabin. Just a thought if it passed a survey and the sea trial. Could be sweet I hear what your saying about looking at newer boats tho and reciently reached out to several sellers after increasing my budget. Feel free to pass along anything you run across. Appreciate the heads up! |
| All times are GMT -5. The time now is 11:15 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.