That place is impressive, I just snooped around their site:
http://www.ottoexcellence.com/about/visual-tour.aspx

These guys make some cool switched I`ve used in my boat


https://www.oznium.com/switches

Cool, I like this: https://www.oznium.com/about

Here is what I ended up doing. I replaced the port and starboard start switch as well as the parallel start switch with the push buttons I listed above. They look nice, seem to be decent quality also. I had to drill the plate to 5/8 so they would fit. The parallel switch is actually a two position switch so what I ended up doing with that is moving that switch down to the side where my now defunct fume alarm had a switch mounted and installed the push button as a blank. It all works as it should and things are much more comfortable with the shifter.

[ATTACH=CONFIG]555871[/ATTACH]

[ATTACH=CONFIG]555872[/ATTACH]