Cigarette Bullet redo
 

In February of 2012 I bought this Bullet from Matthew Smith a at loto. At the time all I did was the interior and a good wet sand and buff. In August or 2013 I blew up one of the 454 Hawks that was in the boat and that is when I decided to redo the boat.
I bought a pair of 525 EFI's from Victory Marine and had "Ozark Speed and Machine" do the machine work while HP Mafia did the motor build. I had Doug at MasterTech Marine do the drive and the transom assembly rebuild. I had mikey paint the bilge and the dash silver on the boat to update it. We ordered all the Livorsi gauges threw Eddie at Big Thunder Marine and the steering wheel is threw Lipship.

Some before photos.

Before shots

[ATTACH=CONFIG]559008[/ATTACH][ATTACH=CONFIG]559009[/ATTACH][ATTACH=CONFIG]559010[/ATTACH][ATTACH=CONFIG]559011[/ATTACH]

[ATTACH=CONFIG]559012[/ATTACH][ATTACH=CONFIG]559013[/ATTACH][ATTACH=CONFIG]559014[/ATTACH][ATTACH=CONFIG]559015[/ATTACH][ATTACH=CONFIG]559016[/ATTACH]

The last set of photos

Very nice..

Nice work. looks great

Brett, the Bullet looks like it turned out great. Still classic with a modern touch.
Wish I would have gotten a close up look at it.

Looks great Brett. Did Innotech do your dash panel & seat plates?