Cabin Project.........What did I do.
#131
Registered
Thread Starter
Not really deep pockets. I am mostly hands off but i have helped a bit with different stuff when I can. Also traded on some labor and favors.
Spent today grinding and laying glass in all the places that were just filled in with resin and filler. On the downhill now but still a ton to do.
#136
Registered
Thread Starter
Some more pictures....new dash coming soon.
Ohhh [email protected] we go ....
New cabin door that was the start of the new dash.
Start of the mock up
Ohhh [email protected] we go ....
New cabin door that was the start of the new dash.
Start of the mock up
#139
o.k., so you mocked it up real nice w/ ply.
now your laying what looks like particle board w/ plastic laminate on the mock up and are tack / glue /screwing it together
to make the mold.
that's a good idea. will you use any filler to round out the inside / outside corners on the part side ?
ever use the same materials prior to this job for a mold ?
how did it turn out ? how about releasing it ?
are you making the cockpit side walls the same way ?
go into some detail, i 'm all ears
now your laying what looks like particle board w/ plastic laminate on the mock up and are tack / glue /screwing it together
to make the mold.
that's a good idea. will you use any filler to round out the inside / outside corners on the part side ?
ever use the same materials prior to this job for a mold ?
how did it turn out ? how about releasing it ?
are you making the cockpit side walls the same way ?
go into some detail, i 'm all ears
#140
Registered
Thread Starter
o.k., so you mocked it up real nice w/ ply.
now your laying what looks like particle board w/ plastic laminate on the mock up and are tack / glue /screwing it together
to make the mold.
that's a good idea. will you use any filler to round out the inside / outside corners on the part side ?
ever use the same materials prior to this job for a mold ?
how did it turn out ? how about releasing it ?
are you making the cockpit side walls the same way ?
go into some detail, i 'm all ears
now your laying what looks like particle board w/ plastic laminate on the mock up and are tack / glue /screwing it together
to make the mold.
that's a good idea. will you use any filler to round out the inside / outside corners on the part side ?
ever use the same materials prior to this job for a mold ?
how did it turn out ? how about releasing it ?
are you making the cockpit side walls the same way ?
go into some detail, i 'm all ears