Cabin Project.........What did I do.
#245
Registered
Thread Starter
#246
VIP Member
VIP Member
cool mold!!!! with the big lip that he had on the edge, shame he couldn't have set up a small vacuum pull on it, to help pull resin, can also use cored honeycomb for strength with less weight.
#247
Registered
Thread Starter
I just let him do his thing. He is old school making sure it will work. he doesn't like to experiment unless he is sure about it.
However he has already taken a ton of weight out of the boat and continues to remove or replace anything that isn't necessary. Even small stuff like bolts are that are too long he cuts off the extra or replaces with a correct size.
However he has already taken a ton of weight out of the boat and continues to remove or replace anything that isn't necessary. Even small stuff like bolts are that are too long he cuts off the extra or replaces with a correct size.
#248
Registered
Killer!!
Absolutely love seeing someone put the effort into keeping these old treasures alive.
I like your idea for the gas caps.
PS, I’ve been following but the stupid “like” button doesn’t work to let you know.
Absolutely love seeing someone put the effort into keeping these old treasures alive.
I like your idea for the gas caps.
PS, I’ve been following but the stupid “like” button doesn’t work to let you know.
#250
Registered
Thread Starter
running all the same stuff we had before. Nothing will really go up into the scoops. They are just the air intakes. We have seen too many cracks around the side intakes and we wanted something unique.