Offshoreonly.com
Page 9 of 10
« First
7
8
9
10
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Cigarette (https://www.offshoreonly.com/forums/cigarette-32/)
-   -   cigarette top gun 38 virgin questions (https://www.offshoreonly.com/forums/cigarette/351467-cigarette-top-gun-38-virgin-questions.html)

rak rua 03-05-2018 09:35 PM
Is it still "seat time" if you're actually on the headrest? :)
Must be hard to tear oneself away from the girls but boating is worth it and you get used to your boat a lot quicker without distractions.
Lookin good!

RR

crowfoot 03-05-2018 09:42 PM
Originally Posted by rak rua (Post 4614204)
Is it still "seat time" if you're actually on the headrest? :)
Must be hard to tear oneself away from the girls but boating is worth it and you get used to your boat a lot quicker without distractions.
Lookin good!

RR
Inside flat water running = on top. ( struggle to see jetskis and small craft just sitting and the dropaway seat doesn't work currently)
Offshore unpredicable running = seated.

rak rua 03-05-2018 09:46 PM
Only having fun, I'm sure you know the difference between the Broadwater and the real water outside.
Take care and enjoy!

CIG3 03-06-2018 09:51 AM
look under the seat there should be a pin on each side. pull those pins and the seat bottom will drop out.

Moxy 03-06-2018 02:39 PM
Originally Posted by F-2 Speedy (Post 4601386)
Im guessing you're not in the States ??

1,200 rpm @ idle is pretty high......I think at a true 2000hp with a 1.5 gear and around a 30p prop you should be touching 80
would have thought closer to 90 than 80

Moxy

F-2 Speedy 03-06-2018 02:56 PM
Okay 90............point is, it takes big power to push those fully dressed flat bottoms through the water

Moxy 03-06-2018 03:56 PM
Originally Posted by F-2 Speedy (Post 4614365)
Okay 90............point is, it takes big power to push those fully dressed flat bottoms through the water
Don't I know it i push one every weekend lol, getting 90 with my #4’s and some stout injected gassers not making 1000 ponies so figured this guys hot rod with 1000’s and 33’s should run mid 90’s easy

crowfoot 03-06-2018 04:02 PM
Originally Posted by CIG3 (Post 4614300)
look under the seat there should be a pin on each side. pull those pins and the seat bottom will drop out.
Thanks but its the hydraulics that's not working, I couldn't see a manual pin. Its going in for a cockpit refit soon so will fix at same time.

frickstyle 03-06-2018 04:40 PM
Originally Posted by Moxy (Post 4614384)


Don't I know it i push one every weekend lol, getting 90 with my #4’s and some stout injected gassers not making 1000 ponies so figured this guys hot rod with 1000’s and 33’s should run mid 90’s easy
Wow, 90mph with NA injected engines, where did I go wrong..... What cube?
I guess you can squeeze 90mph w/ 900hp??? perfect setup?

Sunny32SSR 03-06-2018 06:08 PM
Sloppy. The comment about the jetskiis is bunk. Lower freeboard than mine and I have no problem seeing when I’m standing. Your boss is supposed to be 6’ tall. Poor excuse for a stupid decision.

Take the boat to BrandX and have it fixed correctly. Call Tres or Brad and learn to run the boat. If he doesn’t want to take the class I’d be happy to run it for him.

Originally Posted by crowfoot (Post 4614203)


All times are GMT -5. The time now is 01:30 PM.
Page 9 of 10
« First
7
8
9
10
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.