cafe rebuild
#1
Registered
Thread Starter
Join Date: Sep 2007
Location: Clarks Summit, Pa.
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
cafe rebuild
This is where it started damn this is a project!!! one man operation working evenings after work and weekends.
after a lot of hours and thanks to Glass Dave for advice all damaged areas are under primer
I had to paint it in pieces I could not handle spraying too much at one time
thanks Glass Dave the masks came out great!!
After many months final wet sand and buff is all that's left with the paint
Bilge is all repainted and ready for rigging
Ready to get loaded and taken to dyno
540 Cubes
spent a 10 hour day with Dean Nickerson at the dyno running 2 motors. Nice to finally hear them run
Last edited by jsand117; 03-17-2018 at 02:18 AM. Reason: text
#9
Registered
Thread Starter
Join Date: Sep 2007
Location: Clarks Summit, Pa.
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
#10
Registered
Thread Starter
Join Date: Sep 2007
Location: Clarks Summit, Pa.
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
Thanks OSO people I will post more pictures when i get a chunk of progress done. right now waiting on some power coating for bilge parts, about a week and half worth of work from having the bilge complete so the first motor can be set in. I'll post more pictures before i drop in the 1st motor. the complete cockpit interior, sun pad and some cabin parts are at upholstery shop getting a new look. before too long it should all really start to come together now.