https://cimg0.ibsrv.net/gimg/www.off...4574b1809.jpeg
Getting ready to mount some things
https://cimg1.ibsrv.net/gimg/www.off...cad45950d.jpeg
Power cables ran and labeled
https://cimg3.ibsrv.net/gimg/www.off...3a209828d.jpeg
New steering hose lengths figured out

https://cimg9.ibsrv.net/gimg/www.off...1cb3cad0d9.png
Took a ton of time to figure out how I was going to lay it all out
https://cimg0.ibsrv.net/gimg/www.off...6af11d6f3c.png
Bulk head behind drivers helm is we’re it will all be mounted
https://cimg1.ibsrv.net/gimg/www.off...c1702ffaa.jpeg

What size bilge pumps you all running ? Was thinking of changing out my 1100 to Mable like 2 new 2000s? and maybe running a better hose maybe like a braided hose of some sort ?

I replaced mine with the Rule 1500 pumps and used black live well hose. I had to buy a role of the hose and have plenty left over, so if you need any let me know.

That’s a great idea I never thought of that I didn’t want to use that plastic bilge hose! Did you use 1 inch or 1 1/8?

I believe it was 1 1/8

Ok that’s what all the bigger pumps seem to have . I’ll prollt
order new thru hull fittings and go that route

You may have seen ones like these already. Very placement versatile pump and “float” switch in one. Makes for much cleaner install imo.

I have not seen those that’s a pretty cool set up I will look into those !!

How much hose do you have left? I’m thinking I’d prolly need two 10 foot pieces to do both runs ? If you have enough let me know what you want for it . If not no biggie I think west marine has it.