|
My comment on the dark coloured bilge is that I have always liked a light coloured bilge for 2 reasons , looks cleaner ( personal taste ) and second much easier to spot any type of oil or water leak . Downside harder to keep clean . RG . |
Total agree. I am leaning towards a lighter silver. Trying to picture this black and silver combo with black hardware in my head. I have had plenty of time to think as I have about 45 hours of block sanding done already lol |
Well after a solid week of block sanding the transom filling spots and re block sanding until it’s perfectly flat I finally drilled exhaust holes.... my poor wrist hurts lol sanded the inside of the holes and put a piece of 1.5 ounce mat on them. I left it stick out then after it cured I sanded till it was flush and know have a perfect seal. No more water and rott if water does get past the seal. Transom is al ready for gel coat. Hoping to get that Done next week. . |
|
|
https://cimg0.ibsrv.net/gimg/www.off...beac92254.jpeg Gel on repair https://cimg1.ibsrv.net/gimg/www.off...39c428246.jpeg Tracer coat on and time to block sand |
https://cimg4.ibsrv.net/gimg/www.off...27cacb659.jpeg After hours and hours of block sanding https://cimg5.ibsrv.net/gimg/www.off...de2de5cb9.jpeg Starting to block up this side |
Keep up the work.....I love following these threads. When's your goal to splash?
|
It will be ready when by March when new season is starting!!! Mothers are done interior is done just have to get paint and new rigging done !! |
https://cimg9.ibsrv.net/gimg/www.off...f5d750cf0.jpeg Nose repair complete in gel coat ready for block sanding and side and transom will be in primer in a few days https://cimg0.ibsrv.net/gimg/www.off...dfb57b1b2.jpeg |
| All times are GMT -5. The time now is 12:10 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.