Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Cigarette (https://www.offshoreonly.com/forums/cigarette-32/)
-   -   Cigarette Topgun (https://www.offshoreonly.com/forums/cigarette/356490-cigarette-topgun.html)

division1 12-19-2019 05:19 PM

Wel looking up the part numbers looks like that list is close to 5k per moter. And I think I’d still need all the fuel pumps and misc parts. I may be wrong though. But if that’s around 5 k per moter plus blower that’s about what a whipple kit would run. Ugh so many options. I think at this point I have it narrowed to either stick with the 575 sci injection or stick brand new carbs on it.

division1 12-19-2019 05:22 PM

Just saw above post sorry thanks so much for taking the time to list that all!!!!! Gives me a lot to think about !!

ICDEDPPL 12-19-2019 05:23 PM

https://cimg0.ibsrv.net/gimg/www.off...5f39b40625.jpg



Here`s some options I have set up for Guardian mode .

So the first one is Coolant temp sensor , if the ECU sees temp over 160* it`ll limit power to 2500rpm, once it goes below 150* power is restored.
You get the idea for the others .
I have set up a few more since like water pressure.. so if I throw a belt on the water pump (which has happened) the ECU will know way before I realize what happened .Lots of damage can be avoided.

division1 12-19-2019 05:25 PM

Kvogt what What efi set up are you running ?

ICDEDPPL 12-19-2019 05:25 PM

Im my opinion Eddies injector plate option would probably be the easiest and simplest option.

division1 12-19-2019 05:26 PM

That’s really cool man set up awesome to!!! Props on all that hard work

ICDEDPPL 12-19-2019 05:29 PM

https://cimg8.ibsrv.net/gimg/www.off...45f6f32025.jpg


Still looks like carbs :-) I kept all the same throttle linkages which made it easier.


I love information so the holley screens really hit all the right buttons for me , I can scroll thru many different screens and set up the info I wanna see . the best part is for the gauges and screens all it requires is a data wire.
I got rid of probably 30lbs of sender wires and hoses.

https://cimg2.ibsrv.net/gimg/www.off...b91bd7a491.jpg


the Holley EFI gauges also use one data wire and the power and ground just piggy back to each gauge.




https://cimg0.ibsrv.net/gimg/www.off...10935528a1.jpg




division1 12-19-2019 05:37 PM

So clean man great job !!!!

ICDEDPPL 12-19-2019 05:41 PM

https://cimg9.ibsrv.net/gimg/www.off...0e51b7e524.jpg



Did I mention you can also then go into the software and set the gauges up for warning and alerts etc ?

It`s quite great :Score-101010:

division1 12-19-2019 06:15 PM

I love that stuff !!!! Wish I could afford all that !!!!going to have to think all this over


All times are GMT -5. The time now is 04:55 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.