Coming along, looks good

https://cimg6.ibsrv.net/gimg/www.off...c64041dc1.jpeg
575s got some spice added to them
https://cimg8.ibsrv.net/gimg/www.off...5162f9176.jpeg
https://cimg0.ibsrv.net/gimg/www.off...2267d8afc.jpeg
More wind

So what’s the best place to mount the water pick ups on a notched topgun and what ones do you guys suggest .

To get the best flow, they'll need to be mounted under the notch to the sides of the drain plug.
https://teaguecustommarine.com/plumb...ble-water-pick

thats where mine are as well

nice

nice

Spent the last 2 weeks on the trailer. All new bunks welded all the old light holes shut and all the screw holes . Sand blasted primed and painted. Drilled all new 3/4 round clear leds in it. All new wiring polished the wheels ect. Made it road worthy again from sitting a few years. Luckily it was in nice shape so wasn’t to bad. Just had some resin and filler on it from the last few years . Good as new know !

https://cimg7.ibsrv.net/gimg/www.off...977c1fcd0.jpeg
Last repair lol up front on the bow at the bottom few stress cracks decided to no cut corners and leave for a later time ground out used 2oz and epoxy. Some good filler ands gel this weekend then shooting front half of bottom with epoxy primer and craft 2000 Sunday. Not bottom running surface due to it being blue printed.
https://cimg8.ibsrv.net/gimg/www.off...30a8666db.jpeg
https://cimg0.ibsrv.net/gimg/www.off...66d2e166d.jpeg
https://cimg1.ibsrv.net/gimg/www.off...3db7216ff.jpeg

https://cimg0.ibsrv.net/gimg/www.off...77c9d6b5b.jpeg
Bought one of those polishers for truck wheels seems to work good! Have to have a pretty tow rig!
https://cimg1.ibsrv.net/gimg/www.off...c93c38ba2.jpeg
Nothing beats bay point nights !