Daaaaaayum that’s coming out nice!!! Way to go. Can’t wait to see it all together. Gonna be SIIIIIICK!

You decide on the final paint?

I sure did….. lots of meetings with the painter lots of color charts lots of test panels but we finally found the perfect solution. You will see soon enough!!!!!!! Can wait to start rigging. Had a small moter set back turns out you can’t run distributors on 10-71 with a normal intake didn’t find out till they were all together. Sold my intercoolers already so that was fun but got it figured out. Ended up going with a new pair of blower shop 871s there all together and waiting for bilge to dry

https://cimg9.ibsrv.net/gimg/www.off...c31979248.jpeg
https://cimg0.ibsrv.net/gimg/www.off...7aff7b7a3.jpeg

!!!!! 😍😍😍😍
Fantastic!


question, why’d you get rid of your chillers? Height issue?

Yes the hatch is the twin step 575 hatch didn’t want to cut and put scoops interior is all done didn’t want to modify it . Not spinning blowers to hard moters are 509s with good cams and with 8-71s low boost should make 700-750. Plenty of power lol

I went with 8-71's as well and I also removed the chiller. Running 5 lbs of boost @ 765hp.

https://cimg4.ibsrv.net/gimg/www.off...fc70549f67.jpg

Nice !! What cams did you run ?

https://cimg0.ibsrv.net/gimg/www.off...08b20b545.jpeg
Glasses up the last few holes and bow light 💡
https://cimg1.ibsrv.net/gimg/www.off...349faf7b5.jpeg
Geled ready to be blocked
https://cimg3.ibsrv.net/gimg/www.off...429e9a65e.jpeg
Any one have experience with Simrad ? I know garmen is supposed to be the best but local store has really good deal on this one all touch screen and prettty cheap

They were around long before Garmin.