https://cimg4.ibsrv.net/gimg/www.off...e33d333cfb.png
Single cleat up front like the gladiators
https://cimg5.ibsrv.net/gimg/www.off...2211e728c1.png
Slim line pull ups
https://cimg6.ibsrv.net/gimg/www.off...342a6fe51a.png
All new run rail dry fit before paint. All taken back off and to be installed after paint
https://cimg7.ibsrv.net/gimg/www.off...2d6810aec8.png
Quick drawing of our design

On a side note anymore know we’re my old bullet is ? Been a few years

https://cimg0.ibsrv.net/gimg/www.off...4a9a34d60d.png
Old bullet
https://cimg1.ibsrv.net/gimg/www.off...4eb9e30c42.png
https://cimg2.ibsrv.net/gimg/www.off...b46248180e.png
https://cimg3.ibsrv.net/gimg/www.off...7ec8cd4457.png

Was the Bullet redone by yourself or was that a Carter-built boat?

I did it I had that before my topgun

Had a buddy look at it 2 year ago, not what it was at all...

I heard it got rough it sat out side after I owned it I heard it was a 9/10 when I had it it was a really nice boat

Steve Nykamp was one that told me how it was of a couple, sad they let it go.

Bullet
 

It was in West Michigan last I knew, it must have sunk after you sold it. It failed every moisture test area I touched, I had it bought years ago, tell i surveyed it in Ohio,

That’s a bummer to hear it was solid when I had it I put a lot of time into it lol. That’s why I will never sell my topgun I’ll put it threw a grinder before I let someone ruin it lol. I can see the light at the end of the tunnel!!!