I thought cutting the strakes in the rear would get me more speed, instead it gave it a stupid porpoise that was only solved by putting the bottom back to original.
f***ing with the bottom didn`t work out for me, someone else take the torch and extend the strakes, I`m not messing with my bottom anymore.

after cutting strakes:


I don`t have many video from flat water but it seem to me the water breaks at the helm (about where the inner strakes end) so extending them makes sense.
This is stock factory bottom:

From my own experience with the boat that Phil and Cigarette messed with ('99 Gun, with notched strakes) it did nothing for speed or handling. That is, nothing bad and nothing good. I think it rides like any other straight bottom. Let me see if I can attach a pic...https://cimg8.ibsrv.net/gimg/www.off...736b164c42.jpg

Did they do anything to the inner strakes?

Good question - I don't think they cut the inners but honestly will have to look next time.

Kirk/ zero patience... not sure if that was before or after the 6's were added.

thats what I thought, I remember the paint scheme.

Fwiw, there is a noticable difference in the amount of rocker on the cig compared to the scarab in addition to the strake difference.

My first trip to the Sunsation factory around '02 I saw this firsthand. Joe was walking us around and introduced us to Wayne who at the time was underneath I believe the single engine 32 F-1 boat. He had sections of wood strakes in his hand that he was either screwing or unscrewing from the bottom of the boat. I thought man that's crazy!