dani1025

frickstyle

Can someone post pics of the underside of "Hot for Teacher" hatch? Or other twin step modern hatches?

Trying to find a solution to modify the underside of my hatch/vinyl. It wears, and rips because the hatch sits on vinyl around the lip of the engine compartment.....

F-2 Speedy

iTrader: (6)

my hatch pad sits on top does not wrap around the sides bottom, it is screwed on from the under side, there is a half moon adhesive foam on the underside of the hatch to make the seal.

caseyh

do a all fiberglass hatch and be done.

frickstyle

I have Dave's masterpiece hatch with liner. Dave, do you have any underside pics before upholstery? Saw a few where the upholstery ends topside, just like Speedy says.

F-2 Speedy

iTrader: (6)

I dont have a good pic or I would post it

frickstyle

when you do, please post or email it to me. Going to get by this year, but already planned to touch it up end of season. thanks.

F-2 Speedy

iTrader: (6)

found one of the edge, the pad is about 2 in thick and sets flush with the outside of the hatch,

thisistank

drooooooooool

F-2 Speedy

iTrader: (6)

Wait till you see it in a couple months.......