ISO top gun twin step engine hatch!!
 

Iso top gun twin step engine hatch or someone that can make one for a 1994 cigarette top gun call or text Paul at 4433369560

I believe Darren Oben has a Mold for the Blower Hatch. Not sure his handle here on OSO but you can find him on the FB.

Darren's OSO handle is Dnebo and yes, he does have the mold. I'm pretty sure it's the solid race style / F2 hatch, not the padded raised one. Shoot him a PM.

Tank

Glassdave does some nice topgun hatches too,,,,,

good talkin to ya Dani . . . . :cool:

Thanks again for everyone's help talk to Glass Dave today and going with him can't wait to get my new hatch

What else ya got planned? Scoops, big blower engines, #6drives or arnesons? Out with it! (One of his hatches below for your reference)...

https://cimg9.ibsrv.net/gimg/www.off...ba7dfc2d21.jpg

I am currently run 509 with 250 blower shop blowers 790 hp on 5 pounds of boost boat runs 86 with imco scx with 1400 lowers going to 871,s to get some more power I don't know how to post pics of my boat I am new to all of this. My boat has been set up by Lily's sport boats

Can someone post pics of the underside of "Hot for Teacher" hatch? Or other twin step modern hatches?

Trying to find a solution to modify the underside of my hatch/vinyl. It wears, and rips because the hatch sits on vinyl around the lip of the engine compartment.....

my hatch pad sits on top does not wrap around the sides bottom, it is screwed on from the under side, there is a half moon adhesive foam on the underside of the hatch to make the seal.

do a all fiberglass hatch and be done.

I have Dave's masterpiece hatch with liner. Dave, do you have any underside pics before upholstery? Saw a few where the upholstery ends topside, just like Speedy says.

I dont have a good pic or I would post it

when you do, please post or email it to me. Going to get by this year, but already planned to touch it up end of season. thanks.

found one of the edge, the pad is about 2 in thick and sets flush with the outside of the hatchhttps://cimg1.ibsrv.net/gimg/www.off...c43126702b.jpg,

drooooooooool :drool1:

Wait till you see it in a couple months.......:D