Logo size
#2
Platinum Member
Platinum Member
Differs over the years by style and by painter. I like the traditional logos, like this, but don't have the actual measurements for it. OEM for your boat/year would be a little bit smaller. Maybe someone else can chime in?
Last edited by pm203; 05-21-2019 at 10:20 PM.
The following users liked this post:
J-Bonz (11-26-2020)
#10
Registered
I will measure this for you, newer logo (stretched) on an old school Gun. You can see it both in and out of water. My boat sits a little lower due to a lot of hardware hanging off the back, boxes, SSM5 drives, and big dopey blower engines in the bilge.