Straight bottom on Ebay
 

Looks like a clean ride and reasonably priced............https://www.ebay.com/itm/1993-Cigare....c100009.m1982

509ci , 6lbs of boost and 850 hp.
umm okay then :D

Yea and definitely not a 94 mph boat but it looks clean

SSM3 boat?

I owned this boat 6 years ago. As for the engines, they actually made 870HP and 860HP. That was with full accessories and big tube headers. And the boat when I had it ran 97 GPS. The X Dimension was super high. It was moved twice by Johnny Tomlinson at TNT in Florida and he did the setup and tested the boat. all the rigging was done there and dialed in when I originally bought the boat. The original motors were done by Tommy from Chief.

I heard that the condition of the boat has changed, which is sad.... when I sold it....it was at least a 9.5-10 maybe higher. The majority of the picture 95% are mine from 5-6 years ago. so everything should be checked out.

Drives are 3A's and were completely rebuilt at TNT when I owned the boat.

Billet Caped Dart Blocks, with Dart Pro 1 Aluminum Heads, Venolia Pistons , Lunati Crank, SRP Bolts,T and D Stud Rockers, Full Hydraulic Roller Cam, Demon Carbs, 10-71 Blower Shop Blowers with Intercoolers, 2 Stage Keith Eckert Water Pumps. Both High Flow Mechanical and Electric Fuel Pumps.

First Pulls made over 900HP with more boost.

We stand corrected...................

https://cimg0.ibsrv.net/gimg/www.off...e139722089.png
Here is a picture of rigging the engines on the Dyno. Like I said, 6 years ago..... ALOT HAS CHANGED

I spent a lot of money on that boat. Between the new Engines, Newly Rebuilt Transmissions. Newly rebuilt 3A's, New Gauges, Dash, New Hatch, New trailer, Rigging, x Dimensions, Fineline New Carbon Fiber Interior including new foam and foundation, Lycom Flooring, New Canvas, etc. Just a shame to see it now

Hey Cig,

I remember your boat. It's local (or was last season) to us. Do you remember what RPM and prop you were running when you hit 97? Well setup boat to hit those numbers. How was the handling with such a high X?

Who did those engines? Strong runners for sure.

I have an idea what you spent on it, this would make someone a real nice ride again all cleaned up!

I had 2 sets of props from BBLADES...But I believe the set that went 97 was the pair of 4 blade 17 7/8 x 32. I ran them between 56-5700 RPM. Revlimiter was at 6000. The Engines made power up to 5800 on Dyno Sessions. I sold the boat soon after. I was always in search of the Playboy boat that I wanted since 2001 so I moved the gun down the road. The Gun with the high X dimension was a little difficult to get on plane when conditions were calm......or huge swells. Other then that it was fine. I believe with one step up in pulley and a different wheel, the gun was easily capable of 100 at the time that I owned it. Who knows now. The advertised wheels on ebay are not the ones I had. Engines can't spin 34s unless they are small diamter. I don't know what would be gained...who knows

Well those are some great numbers , must have had some good compression but also a bunch of high end parts inside.
Shame that someone can take a beautiful well cared for boat and murder it inside a few years and then advertise it with old pics.
You know some poor sucker is going to travel halfway across the country to see it and be very disappointed.
I hate when people do that

I went with a friend to look at a trailer a few years back. After driving to New Hampshire, trailer was junk. Asked the owner about the pictures he sent(looked great in pictures). He said the pictures were from when he bought it, many years back. The generator was different-junk.

Now any time I am interested in something with pictures, I always ask if the pictures are current. If not and the seller will not send current pictures I move on.