1986 Flatdeck
12-01-2022, 08:54 AM
#31
Registered
Thread Starter
Between work getting in the way and time delays in getting parts, this project is taking longer than I thought lol. Finally got carbs back, now another day of repair/glass work.
The following 2 users liked this post by ScottyChatham:
87MirageIntruder (12-23-2022), TomZ (12-01-2022)
12-01-2022, 11:17 AM
#33
Registered
Thread Starter
Everything in the engine compartment was! lol
Transom, stringers and bulkhead all got to be replaced. Added a couple extra weeks labor, but we ordered enough plexus, Penske boards and fiberglass and resin just in case it was. So no unforeseen extra cost yet.
Transom, stringers and bulkhead all got to be replaced. Added a couple extra weeks labor, but we ordered enough plexus, Penske boards and fiberglass and resin just in case it was. So no unforeseen extra cost yet.
The following 5 users liked this post by ScottyChatham:
87MirageIntruder (12-23-2022), ICDEDPPL (12-02-2022), jbraun2828 (12-05-2022), Knot 4 Me (12-06-2022), TomZ (12-02-2022)
12-17-2022, 05:48 AM
#35
Registered
Thread Starter
Did not make the original completion goal of Christmas. Had some jobs/work come up unexpectedly and wife decided we should go to Key West for Christmas week!!!! So new completion goal is Valentines Day!
The following users liked this post:
87MirageIntruder (12-23-2022)
The following 5 users liked this post by ScottyChatham:
bajaman (12-17-2022), Griff (12-22-2022), Knot 4 Me (12-18-2022), Stuckonstupid (12-17-2022), TomZ (12-17-2022)
12-17-2022, 07:36 AM
#37
VIP Member
VIP Member
What are the black things at the lower end of the Vee on the transom?
__________________
Baja 252 Islander
Baja 252 Islander
The following users liked this post:
Knot 4 Me (12-18-2022)
12-17-2022, 08:10 AM
#39
Registered
May not be much fun boating come next week there. Going to be North Pole cold here at LOTO. BTW, keep up the great work and coverage! I love this project, keep at it and Merry Christmas!
