Offshoreonly.com - Anyone have stl file of cig logo

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Cigarette (https://www.offshoreonly.com/forums/cigarette-32/)

- - Anyone have stl file of cig logo (https://www.offshoreonly.com/forums/cigarette/384674-anyone-have-stl-file-cig-logo.html)

Brad Christy

02-06-2025 07:17 AM

Quote:

Originally Posted by Bill 3 (Post 4919706)

Translucent filaments are not necessary. All of the ones I have printed were with jsut standard PLA filament. I have not actually made one, but I don't think it is too difficult.

Bill,

Good to know. I have no tried to light anything yet. Been on my mind, though, for hr hitch covers.

Thanks. Brad.

Bill 3

02-06-2025 07:25 AM

Quote:

Originally Posted by Brad Christy (Post 4919709)

Bill,

Good to know. I have no tried to light anything yet. Been on my mind, though, for hr hitch covers.

Thanks. Brad.

Lighted hitch cover - that would be cool! Might need translucent filament though. These light boxes are VERY thin on the front where the light comes through.

Wildman_grafix

02-06-2025 07:52 AM

What file format do you need?

Bill 3

02-06-2025 08:35 AM

Quote:

Originally Posted by Wildman_grafix (Post 4919711)

What file format do you need?

I beleive do design the 3D print, SVG would be needed. However I wouldn't mind some high quality JPG, PNG files just to have on hand.

Brad Christy

02-06-2025 08:41 AM

Quote:

Originally Posted by H20 Toie (Post 4919169)

I've been playing with new 3d printer and would like to add cig logo to some things, i haven't learned cad yet and the logos i've done have only come out so so, hoping someone has a file i can use

https://cimg7.ibsrv.net/gimg/www.off...5022571bc.jpeg

H2O,

If you send me a PM, we can exchange numbers and I might be able to help you with an STL file. What printer and slicer are you using?

Thanks. Brad.

All times are GMT -5. The time now is 09:00 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page