|
|
Top
Top of other manifold with the gasket off tells me a bit more I believe on the age of these things….
https://cimg7.ibsrv.net/gimg/www.off...9420f5dab.jpeg |
…
Originally Posted by Ryanw10
(Post 4941431)
And what's going on here?
https://cimg8.ibsrv.net/gimg/www.off...3cc3a33711.jpg https://cimg1.ibsrv.net/gimg/www.off...714662e59.jpeg |
That impeller is smoked...you can see the black rubber bits on the center of the plate....doesn't take much for them to start sucking air and you get steam pockets in the water system....also kinda looks like the center of it is "stripped out" for lack of better terms. Was it actually spinning or was the shaft spinning inside the impeller? Could just be the pic but that impeller is def an issue to me anyway, not saying it caused the issue but it is one issue. Possibly was sucking enough air/cavitating in the housing and the water flashed to steam in the header and POP?? Just a thought....
|
I
Originally Posted by BBYSTWY
(Post 4941672)
That impeller is smoked...you can see the black rubber bits on the center of the plate....doesn't take much for them to start sucking air and you get steam pockets in the water system....also kinda looks like the center of it is "stripped out" for lack of better terms. Was it actually spinning or was the shaft spinning inside the impeller? Could just be the pic but that impeller is def an issue to me anyway, not saying it caused the issue but it is one issue. Possibly was sucking enough air/cavitating in the housing and the water flashed to steam in the header and POP?? Just a thought....
luckily I think I did make an upgrade with these Hardin marine pumps https://cimg5.ibsrv.net/gimg/www.off...6e3eaa352d.png |
What fuel pump is that? It does not look like a Merc. Or did you strip the paint off of it.
|
|
| All times are GMT -5. The time now is 01:14 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.