Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Cigarette (https://www.offshoreonly.com/forums/cigarette-32/)
-   -   bullet hydraulic mess (https://www.offshoreonly.com/forums/cigarette/86858-bullet-hydraulic-mess.html)

riski bidness 09-12-2004 08:38 PM

bullet hydraulic mess
 
have a 1988 cig bullet the hydraulic line that operates the trim cylinder on the outdrive is leaking.the line comes out of the hydraulic pump and through the transom into the outdrive.I can see hydraulic fluid dripping down the transom in the engine compartment. do i have to pull the outdrive to repair the line.The outdrive is a bravo one

CIG3 09-13-2004 02:49 PM

Re: bullet hydraulic mess
 
NO, there is a block on the bottom of the gimble that the line from the pump connects to the line that goes to ht ecylinder, all you'll need is a wrench to get it apart.

riski bidness 09-13-2004 04:28 PM

Re: bullet hydraulic mess
 
cig 3 thanks i will give it a try

Zero Patience 09-13-2004 08:00 PM

Re: bullet hydraulic mess
 
Just repaired the same type problem on a 95 Cafe, it was the collector Block under the drive. It corroded out, the hoses were fine.


All times are GMT -5. The time now is 03:21 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.