![]() |
Re: Project: 46 Rough Rider
Mat,
Hope you're enjoying your new project. Call me if you need anything else. I'm working on the trailer title. - Colin |
Re: Project: 46 Rough Rider
What to do for power? 1st option: 3 brand new complete 525 engine/ drive package. 2nd: Have a local guy here build 3 engines out of Donovan alum. block/ alum. heads. 660 c.i. roughly 700 h.p., and 800 lbs of torque, three imco drives. Or 3rd choice have Joey Griffen build 3 600 hp motors and imco drives. Choice one is most cost effective followed by choice two is only 3-4k more and choice 3 is about 13k more than the 525's. What would you do?
Thanks for the input. Mat |
Re: Project: 46 Rough Rider
Great Cigarette!
Best of Luck |
Re: Project: 46 Rough Rider
Originally Posted by mcraymond3
What to do for power? 1st option: 3 brand new complete 525 engine/ drive package. 2nd: Have a local guy here build 3 engines out of Donovan alum. block/ alum. heads. 660 c.i. roughly 700 h.p., and 800 lbs of torque, three imco drives. Or 3rd choice have Joey Griffen build 3 600 hp motors and imco drives. Choice one is most cost effective followed by choice two is only 3-4k more and choice 3 is about 13k more than the 525's. What would you do?
Thanks for the input. Mat |
Re: Project: 46 Rough Rider
Congrats,Looks like an awesome boat-
525's sounds like the way to go,they will run forever!! After the "Tiger 1" project-I've learned a lot !!! Call with any questions 410-213-7166 Rob |
Re: Project: 46 Rough Rider
If you want reliability and less cost go with the 525's for sure. If money is no object and you want WILD...stagger some 1350's in the bad boy and hook up some SSM #6's. :D Either way you go...it's a Rough Rider :cool: :)
|
Re: Project: 46 Rough Rider
[QUOTE=clearcut3 Either way you go...it's a Rough Rider :cool: :)[/QUOTE]
Aint that the statement of the thread!! Sweet a$$ boat right there! I'd do the 525's for the reliability and you'll still get your 80 out of it. |
Re: Project: 46 Rough Rider
mat...i think you and i exchanged emails about the Hustler that was for sale at Falcon...if that is true, i'm glad to see you finally found your "project" :) awesome boat...congrats! my .02 would be fo go for the 525s from mercury...hands down...i too have learned...you'll spend more time on the water and less time at the dock.
|
Re: Project: 46 Rough Rider
Sean. you are right. I did like the 50ft Hustler that was for sale at Falcon. Who ended up with that boat? Do they have it running yet? The high performance boating world sure is small. Take care.
Mat |
Re: Project: 46 Rough Rider
:D Save a lot of money and a real lot of problems 525s...that is a nice find.
|
| All times are GMT -5. The time now is 05:50 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.