Offshoreonly.com - 98 TG 500's & Hunter Graphics

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Cigarette (https://www.offshoreonly.com/forums/cigarette-32/)

- - 98 TG 500's & Hunter Graphics (https://www.offshoreonly.com/forums/cigarette/98789-98-tg-500s-hunter-graphics.html)

Croozin2

03-29-2005 10:09 AM

Re: 98 TG 500's & Hunter Graphics

Well, Scott at Suncoast says the motors have 350 total hours with the heads being redone at 250. Digging a little further as we speak :D

chewy1955

03-29-2005 10:51 AM

Re: 98 TG 500's & Hunter Graphics

WOW! 350 is considered a ton? I guess tyhey must typically be run hard quite often.

Team V

03-30-2005 08:35 AM

Re: 98 TG 500's & Hunter Graphics

Nice boat,

Valve springs would just start to become an issue at 250 hours... but a head job? Maybe just a valve spring job? If proper maintenance was done on the engines, (and I would believe it had to be with a boat this clean) I'd consider 350 fairly low hours... that's only about 50 hours/ year. And they could not have been all WOT...

Good luck :drink:

All times are GMT -5. The time now is 10:14 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page