Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Classic Offshore (https://www.offshoreonly.com/forums/classic-offshore-199/)
-   -   Interesting Old Chris Craft on Craigs in MN (https://www.offshoreonly.com/forums/classic-offshore/276719-interesting-old-chris-craft-craigs-mn.html)

livnluce 05-18-2012 12:55 PM

Interesting Old Chris Craft on Craigs in MN
 
Doesn't say the model.

http://images.craigslist.org/5Kb5F55...8dfde416bb.jpg

http://images.craigslist.org/5N75Ga5...1401471687.jpg

Fountain hull
2 330 HP Mercruiser
Fresh tune-up/service

READY FOR WATER

trailer $2500 boat $13 000

Call Doug 612-309-5161

Powerquest_Baby!! 05-18-2012 01:14 PM

Thats not a bad price for a 32 foot stinger assuming the stringers and transom are in good shape. He says its ready for the water but there has to be something in need of repair otherwise why the cheap price?

machloosy 05-21-2012 07:57 AM

15500 Doesn't seem too cheap for a sbc powered stinger... Especially considering it's age, obviously it needs a good cleaning.

InstaGator 05-21-2012 08:19 AM

Twin 454's not SBC's. 330 H/P. Still a nice looking Stinger. I'd definately own it...

Too Stroked 05-21-2012 11:00 AM

"Fountain hull?" Not on a Stinger.

ESCOBAR 05-21-2012 12:30 PM


Originally Posted by Too Stroked (Post 3692251)
"Fountain hull?" Not on a Stinger.

That is a good looking Stinger IMO. I would rather have this Chris Craft than a 22ft Progression with a mercury outboard.

88bullet 05-21-2012 01:11 PM

1 Attachment(s)
Of course you would!!

Too Stroked 05-21-2012 01:18 PM


Originally Posted by ESCOBAR (Post 3692364)
That is a good looking Stinger IMO. I would rather have this Chris Craft than a 22ft Progression with a mercury outboard.

I never said it wasn't a good looking boat. I always loved the way those old Stingers looked - particularly on the early Miami Vice episodes.

What I'm questioning is how one ends up with a Fountain hull under a Chris Craft. (Excaliber maybe.)

TGC-32 05-21-2012 10:16 PM

The original 31' Chris Craft Stingers and Fountain Executioners were both derived from the 31' Excalibur. All three are essentially the same boat, prior to Fountain adding the "beak" after the first ten or so Executioners.

Too Stroked 05-22-2012 05:27 AM


Originally Posted by TGC-32 (Post 3692832)
The original 31' Chris Craft Stingers and Fountain Executioners were both derived from the 31' Excalibur. All three are essentially the same boat, prior to Fountain adding the "beak" after the first ten or so Executioners.

Thanks. That makes perfect sense. I was aware of the Excalibur connection, but didn't know the design was shared with CC.


All times are GMT -5. The time now is 10:08 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.