Lil Rhino
10-31-2018 | 02:45 PM
#41
Registered
Joined: Sep 2012
Posts: 69
Likes: 15
From: Port Cinton, Ohio
Not that I have seen. It will be getting a good make over before it goes. I have all ready got the mechanical and electric's up to par. Working on the side windshield glasses now and putting new rubber glazing in all of it (that was hard to find) . In the spring it will be getting a new paint job and carpet.
10-31-2018 | 03:23 PM
#42
Registered
Joined: Sep 2018
Posts: 57
Likes: 0
I had to get a 500' roll . It takes 51' per boat (so call it 60' ) . It was $4 a foot. So you and your friend need about 120'. ($480 plus the ride $20) let me know what you want to do.
Last edited by EDT; 10-31-2018 at 03:44 PM.
11-01-2018 | 06:07 PM
#48
Registered
Joined: Sep 2018
Posts: 57
Likes: 0
[QUOTE=Thriller62;4657071]
Is this what the original on yours looked like?
There was vary little left in mine but what was there looked nothing like that. It looked much like what I have now. Did the link I sent you let you see what I have?
Last edited by EDT; 11-01-2018 at 06:10 PM.
11-01-2018 | 06:39 PM
#49
Registered
Joined: Sep 2012
Posts: 69
Likes: 15
From: Port Cinton, Ohio
Yes I got the pictures. That’s why I posted a picture of the original, they looked quite a bit different. Starting to think there’s a big difference between your windshield and the ones with the grab rail.
11-01-2018 | 08:03 PM
#50
Registered
Joined: Sep 2018
Posts: 57
Likes: 0
I will take a pic of the channel tomorrow so you can get a look at it. You could be right.
