Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Classic Offshore (https://www.offshoreonly.com/forums/classic-offshore-199/)
-   -   GLOPRA Pictures (https://www.offshoreonly.com/forums/classic-offshore/289202-glopra-pictures.html)

scippy 04-15-2016 09:26 PM


Originally Posted by Cary 29 (Post 4428890)
Thanks probably 3 blades? I was told to spin in. I'm running 4 blades though with big diameter.

Cary you gotta post some pictures Bro!

Cary 29 04-16-2016 07:26 AM


Originally Posted by CIG3 (Post 4428784)
Spinning Out

I will email you some Skippy

legend 04-20-2016 08:57 PM


Originally Posted by TENSION (Post 4428052)
Lose an engine?

Went to single engine, lost transmissions with Bravo instead of TRS, took out all three tanks up front and installed light weight fuel tank behind cockpit, Built a 25 pound full length honeycomb engine hatch which goes from transom to the back of the two light weight racing seats with two inch aluminom monocot tubed cockpit, Full length 3/16 aluminum dash panel with six inch aluminum deck panel between seating and engine hatch, only a 4x6 ft honeycomb cockpit floor, deleted everything else that makes a stock cockpit, no back seat or heavy bolsters, light weight single engine layup, purchasing mostly aluminum engine components and exhaust. Lowered cockpit floor, light core built in fairing, very light but from the cockpit to the engine mounts, everything ties together. And still going.

Ryansean16 08-01-2017 09:25 AM


Originally Posted by legend (Post 3848623)
So then lets open another B-Wiser and keep looking at pictures. Cheers

that's our boat!! Nice pic!!

Samspencer66 09-08-2017 03:04 AM

Awesome old pictures. Thanks :-)

Thunderbuzzard 05-25-2019 04:28 PM

Original WMMS Radio Thnuder Buzzard P100
 
I was the original owner of the WMMS Thunder Buzzard P100 and miss GLOPBRA like crazy. It was the 1st Innovation 24 that was built with Kevlar and unfortunately, being the 1st is not always the best since we were plagued by broken stringers and delamination. It time to reconnect with Bobby Nielson from Eastlake, Ohio who was my navigator and never he let me down..

golfmaxgolf 04-22-2020 10:34 AM

Fantastic Thread, This never gets old!

benboat 02-19-2021 11:46 PM

Piranha
 

Originally Posted by h2oboater (Post 3880024)
Does any one know who owned Piranha, & if it was a single or twin engine 29' Mag??

I know this is an old post but my Dad, Ben Gommel owned and raced Piranha in the late 70s and early 80s. We owned Cuyahoga Boat & Engine in Cleveland and hosted several Glopra races. The boat had 4 Mercury outboard motors. This was the original Boar Hog. My Dad and I were just discussing how the boat would run with 3 of the new Mercury 600s.

Scorpion 17 07-12-2023 04:06 PM


Originally Posted by benboat (Post 4778206)
I know this is an old post but my Dad, Ben Gommel owned and raced Piranha in the late 70s and early 80s. We owned Cuyahoga Boat & Engine in Cleveland and hosted several Glopra races. The boat had 4 Mercury outboard motors. This was the original Boar Hog. My Dad and I were just discussing how the boat would run with 3 of the new Mercury 600s.

Hey Benny! My name is Brian Matthei, My dad Red and your dad were crazies together back at Cuyahoga boat. I remember racing Pirannah with it's black maxes from the boat yard almost to shooters with Bill Steiskal in the Little Scorpion. The twin Volvos get pirannah out of the hole, but once the big Black Max power got that thing moving he got around us. I thought neither would let off and race to the lake, what a ride!

benboat 07-12-2023 11:18 PM

I remember your dad well and those were some crazy times. The Little Scorpion is in Vermilion now running a single big block. I saw it on July 4th.


All times are GMT -5. The time now is 12:27 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.