Notices

GLOPRA Pictures

Thread Tools
 
Old 02-29-2016, 07:18 AM
  #241  
Registered
 
CIG3's Avatar
 
Join Date: Jan 2001
Location: Grand River, Ohio
Posts: 2,278
Likes: 0
Received 10 Likes on 9 Posts
Default

I raced in the boat with the bravo's it was a handful. My opinion was they mounted the drives way to high. On boxes they were around an inch above the bottom. This caused the boat the want to chine walk and run nose high. They ended up adding ballast to the nose which helped some. I liked the way it ran with the Arneson's much better. it just needed propped better which was a lot of cash back then.

Originally Posted by HTRDLNCN
Yup,I have that pic ,, looks like it was riding pretty neutral there which is what you want.
On the 36 race boat what Sal Picon did was run air lines from the top to vent the steps.
Worked well but the 36 was twin step .
Im also re-installing the ballast tank back in the front in case the big blocks make it a little nose happy..
Like I said it will just be a fun poker run boat so its probably not gonna see the seas or speed it used to, if I can get mid 80s out of it Ill be tickled pink. Its still a very solid boat and being the only one ever made makes it all that much more interesting..
CIG3 is offline  
The following users liked this post:
Twin O/B Sonic (07-13-2023)
Old 03-02-2016, 10:01 AM
  #242  
Registered
 
Join Date: Nov 2015
Posts: 22
Likes: 0
Received 1 Like on 1 Post
Default

great pics
term1032000 is offline  
The following users liked this post:
Twin O/B Sonic (07-13-2023)
Old 03-08-2016, 06:47 PM
  #243  
bck
Charter Member#568
Charter Member
 
bck's Avatar
 
Join Date: Dec 2000
Location: Western N.Y.
Posts: 2,171
Received 16 Likes on 14 Posts
Default

Originally Posted by glassdave
ohhh i was schooled by someone from the area that berated me for pronouncing the "T" in Mentor . . . ever since then it has been Menner . . . .
I stick to the lower class neighborhoods. I know there is no "g" in Collinwood
__________________
Straight bottoms and flat decks
bck is offline  
The following users liked this post:
Twin O/B Sonic (07-13-2023)
Old 03-08-2016, 08:02 PM
  #244  
Registered
iTrader: (3)
 
J-Bonz's Avatar
 
Join Date: Dec 2003
Location: Cleveland, OH / Pewaukee, WI
Posts: 5,869
Received 363 Likes on 208 Posts
Default

Originally Posted by bck
I stick to the lower class neighborhoods. I know there is no "g" in Collinwood
Yeah, but there are alot there that think they are "G's"....
J-Bonz is offline  
Old 04-12-2016, 05:07 PM
  #245  
Registered
Thread Starter
 
Join Date: Jan 2012
Location: Madison Ohio
Posts: 316
Likes: 0
Received 3 Likes on 3 Posts
Default

[ATTACH=CONFIG]553986[/ATTACH].

Mad Mother, Cheap Thrills, L.A. Express is almost complete and 1400 LBS Lighter
Attached Thumbnails GLOPRA Pictures-img_20160307_173515769.jpg  
legend is offline  
The following users liked this post:
Twin O/B Sonic (07-13-2023)
Old 04-13-2016, 12:03 PM
  #246  
Platinum Member
Platinum Member
iTrader: (3)
 
scippy's Avatar
 
Join Date: Jan 2007
Location: Jackson, n.j. ~ Brooklyn, n.y.
Posts: 2,083
Received 151 Likes on 77 Posts
Default

Originally Posted by legend
[ATTACH=CONFIG]553986[/ATTACH].

Mad Mother, Cheap Thrills, L.A. Express is almost complete and 1400 LBS Lighter
Great job she looks reborn!.......where did you shed the weight?............I know you lowered the cockpit sole, what other improvements did you make?
scippy is offline  
The following users liked this post:
Twin O/B Sonic (07-13-2023)
Old 04-13-2016, 01:18 PM
  #247  
Gold Member
Gold Member
 
TENSION's Avatar
 
Join Date: Aug 2005
Location: Huron, Ohio
Posts: 367
Received 24 Likes on 5 Posts
Default

Lose an engine?
TENSION is offline  
The following users liked this post:
Twin O/B Sonic (07-13-2023)
Old 04-14-2016, 06:06 PM
  #248  
Registered
 
Join Date: Feb 2012
Location: Syracuse,NewYork
Posts: 468
Received 171 Likes on 70 Posts
Default

Cig 3 was the arneson drive setup you mentioned spinning in or out. Thanks for the info. I'm rerigging my boat with Arneson s. Similar bottom. Cary 29'9"
Cary 29 is offline  
The following users liked this post:
Twin O/B Sonic (07-13-2023)
Old 04-15-2016, 10:55 AM
  #249  
Registered
 
CIG3's Avatar
 
Join Date: Jan 2001
Location: Grand River, Ohio
Posts: 2,278
Likes: 0
Received 10 Likes on 9 Posts
Default

Spinning Out

Originally Posted by Cary 29
Cig 3 was the arneson drive setup you mentioned spinning in or out. Thanks for the info. I'm rerigging my boat with Arneson s. Similar bottom. Cary 29'9"
CIG3 is offline  
The following users liked this post:
Twin O/B Sonic (07-13-2023)
Old 04-15-2016, 04:35 PM
  #250  
Registered
 
Join Date: Feb 2012
Location: Syracuse,NewYork
Posts: 468
Received 171 Likes on 70 Posts
Default

Thanks probably 3 blades? I was told to spin in. I'm running 4 blades though with big diameter.
Cary 29 is offline  
The following users liked this post:
Twin O/B Sonic (07-13-2023)


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.