|
Does anyone happen to know how many scarab 46' boats were made?
|
Team Scarab built 7 46s and 1 50. according to the records for the Hull ID number that I have from Team Scarab.
|
Thank you for the quick reply!
|
1 Attachment(s)
Gentry update All 3 Engines are now dyno'ed they all run great and are all have the same the power curve, We found out why they had boost control at the dash you have to dial in the boost to make them all the same no 2 springs are the same. [ATTACH=CONFIG]554806[/ATTACH]
|
Fuel system is just about complete then the water system and install engines.
|
Pretty cool!
|
Originally Posted by Team Archer
(Post 4414497)
The Dyno went well motor ran great once we figured out how not to heat up the cooling tower in the dyno. Had to plumb the exhaust and turbo's separate of the engine water. [ATTACH=CONFIG]552166[/ATTACH][ATTACH=CONFIG]552167[/ATTACH] Motor made 900 foot pounds of torque at 3500 rpms
Unbelievable work ! The craftsmanship on this project is simply amazing. Its a pleasure to see the project progress. As for the motors, what was the HP they made? And how much boost are you running them at? |
on pump gas we are running them at 10 lbs in the mid 900 range at 12 lbs they jumped up to around 1100 +. We are building them for endurance not overall speed.
|
1 Attachment(s)
Fit the center motor today thought we might have a clearance problem but its fits perfect.[ATTACH=CONFIG]555176[/ATTACH][
|
Looks great Dan.....still need to bring mine by...
|
| All times are GMT -5. The time now is 01:17 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.