#99 gentry 46' scarab restoratoin
#194
Platinum Member
Platinum Member
Thread Starter
Gentry update All 3 Engines are now dyno'ed they all run great and are all have the same the power curve, We found out why they had boost control at the dash you have to dial in the boost to make them all the same no 2 springs are the same. [ATTACH=CONFIG]554806[/ATTACH]
#197
Registered
The Dyno went well motor ran great once we figured out how not to heat up the cooling tower in the dyno. Had to plumb the exhaust and turbo's separate of the engine water. [ATTACH=CONFIG]552166[/ATTACH][ATTACH=CONFIG]552167[/ATTACH] Motor made 900 foot pounds of torque at 3500 rpms
Unbelievable work ! The craftsmanship on this project is simply amazing. Its a pleasure to see the project progress. As for the motors, what was the HP they made? And how much boost are you running them at?
#198
Platinum Member
Platinum Member
Thread Starter
on pump gas we are running them at 10 lbs in the mid 900 range at 12 lbs they jumped up to around 1100 +. We are building them for endurance not overall speed.
#199
Platinum Member
Platinum Member
Thread Starter
Fit the center motor today thought we might have a clearance problem but its fits perfect.[ATTACH=CONFIG]555176[/ATTACH][