Better built boat... Martini or Corsa?
#2
Registered
Both pretty much the same. What ever was the good Glass & Resin for that era is what their made from, Just like the Cigs,Panteras,Apaches,Tempest ect. For what ever year the boat is you can bet that all the Mfgrs where buying the same stuff.
#4
Registered
Well said, Joker! And to the original poster, the Corsa and the Martini were the same boat, both built by Bob Bower out of Miami, so to answer your question, they would've been built to the same specs.
My 26' is built like a brick ****house, it'll go through anything, and come out with smile.
Harry
My 26' is built like a brick ****house, it'll go through anything, and come out with smile.
Harry
#6
+1
Well said, Joker! And to the original poster, the Corsa and the Martini were the same boat, both built by Bob Bower out of Miami, so to answer your question, they would've been built to the same specs.
My 26' is built like a brick ****house, it'll go through anything, and come out with smile.
Harry
My 26' is built like a brick ****house, it'll go through anything, and come out with smile.
Harry
__________________
Thanks, Barry
Driver - High's Fuel Your Journey Cigarette Racing Team #598
Thanks, Barry
Driver - High's Fuel Your Journey Cigarette Racing Team #598
#7
Registered
Join Date: Jan 2015
Location: Oak Glen, CA - Now in Winter Haven, FL
Posts: 33
Likes: 0
Received 8 Likes
on
3 Posts
Yes and no...
The very first Martini was hand made by the founder of Martini, Corsa and Stuart Angler (a sport fishing line of boats). This first boat was literally created from scratch in his brother's backyard!
For the next few years, they [Bob and John Bower] built up Martini, with both 7 & 9 meter boats. As the company grew and a few changes were made, Martini phased out and Corsa took it's place ... sort of like when Datsun became Nissan.
Stuart Angler, by the way, is essentially a Corsa hull, rigged with a deep-sea fishing boat topside. However, they all originated from the Martini molds.
PS: I'm the daughter and niece of the two founders.
The very first Martini was hand made by the founder of Martini, Corsa and Stuart Angler (a sport fishing line of boats). This first boat was literally created from scratch in his brother's backyard!
For the next few years, they [Bob and John Bower] built up Martini, with both 7 & 9 meter boats. As the company grew and a few changes were made, Martini phased out and Corsa took it's place ... sort of like when Datsun became Nissan.
Stuart Angler, by the way, is essentially a Corsa hull, rigged with a deep-sea fishing boat topside. However, they all originated from the Martini molds.
PS: I'm the daughter and niece of the two founders.
#8
Yes and no...
The very first Martini was hand made by the founder of Martini, Corsa and Stuart Angler (a sport fishing line of boats). This first boat was literally created from scratch in his brother's backyard!
For the next few years, they [Bob and John Bower] built up Martini, with both 7 & 9 meter boats. As the company grew and a few changes were made, Martini phased
out and Corsa took it's place ... sort of like when Datsun became Nissan.
Stuart Angler, by the way, is essentially a Corsa hull, rigged with a deep-sea fishing boat topside. However, they all originated from the Martini molds.
PS: I'm the daughter and niece of the two founders.
The very first Martini was hand made by the founder of Martini, Corsa and Stuart Angler (a sport fishing line of boats). This first boat was literally created from scratch in his brother's backyard!
For the next few years, they [Bob and John Bower] built up Martini, with both 7 & 9 meter boats. As the company grew and a few changes were made, Martini phased
out and Corsa took it's place ... sort of like when Datsun became Nissan.
Stuart Angler, by the way, is essentially a Corsa hull, rigged with a deep-sea fishing boat topside. However, they all originated from the Martini molds.
PS: I'm the daughter and niece of the two founders.
Great info! I was always curious about the two. Welcome to the forum.
#9
Registered
Join Date: Jan 2015
Location: Oak Glen, CA - Now in Winter Haven, FL
Posts: 33
Likes: 0
Received 8 Likes
on
3 Posts
Thank you for the welcome. I'm glad I could be here.
You could say, morbid curiosity and nostalgia brought me here initially. Still, I'm glad I can be here for some of the people who still have questions.
You could say, morbid curiosity and nostalgia brought me here initially. Still, I'm glad I can be here for some of the people who still have questions.