We are excited to announce that we have acquired a piece of powerboat history. We got our hands on a mold built using a 29’ Mirage from Cortes as a plug and stretched to 33’. It was built by a gentleman “Pedro Repoli” no longer around that worked for magnum, cigarette and midnight express. The mold has been sitting for over 20 years upside down until we found her. We are currently getting her cleaned up and polished up along with making a few improvements to her. We plan on building a 28’ & 30’ models with euro transom laid out as center consoles but we can build to suit or sell hull as kit to be finished elsewhere. If you have any questions please dm us or follow us at VidaMar Boats on Instagram. I will be posting pics as we progress thank you for viewing

Well guys I can’t post pics until I have ten post so I guess pics will have to wait

Wally I like the way you think buddy lol

EDT thanks for the feed back the 30’ model is going to be similar to the 29’ as I believe that the centerline measurement was just shy of 30’ so we are going to make it 30’ and wanted to make a smaller one 28’ for those individuals that may want or can’t afford the bigger model. We are also thinking of building a 32’. They will all be great including the 28’ bc of the 8.6’ beam on her. That’s our thinking always

Here’s the specs for the 9 meter ss

EDT & Thriller a lot of the boat is staying on the mirage. Yes it was widthed 6” and stretched 4’ but the freeboard is the same and the strakes where not changed, plus all change is not bad. Look at the 30’ velocity I have been told that it is a copy of the 29’ mirage that a pad was added to it. I agree with you that it has been altered a bit but the the altercations I think will improve a already great boat. With that said I respect your opinions!