Mystery Mold 23x8
#11
Registered
Thread Starter
tommy definitely not a 24x7 it’s wider I have a pantera right next to mold and nothing alike. It looks just like the 24’ cigarette/banana the mold picture that is being laminated is identical to the mold I have looks just like it.
#12
Registered
Join Date: Jul 2003
Location: miami fla.
Posts: 1,554
Likes: 0
Received 0 Likes
on
0 Posts
Can it be the Avanti 22? Not the Avanti that was made here I believe these where made in NY maybe.
It looks like it to me.
Here is a link to one: https://www.boatboss.com/images/pics/pic_573393.jpg
It looks like it to me.
Here is a link to one: https://www.boatboss.com/images/pics/pic_573393.jpg
#14
Registered
iTrader: (3)
Can it be the Avanti 22? Not the Avanti that was made here I believe these where made in NY maybe.
It looks like it to me.
Here is a link to one: https://www.boatboss.com/images/pics/pic_573393.jpg
It looks like it to me.
Here is a link to one: https://www.boatboss.com/images/pics/pic_573393.jpg
#15
Registered
Thread Starter
the cap looks like it but who ever built it definitely did some modifications to it. But you were the first one to call it buddy! Lol
I have had some people already inquire about building one for them down here. I can’t wait to pop the first one.
the original seller told me that he got it from some fiberglass guy in fort pierce and that the guy also had a racing boat designed by Harry Schoell as well.
Last edited by numberonemarine; 10-09-2019 at 06:59 PM.
#17
Registered
Thread Starter
can you give me the width of your bottom lifting strake and the distance from where it ends to the transom. I don’t think it’s a Monza but might be. What did the Monza come from because the only boats I’ve seen with that rounded bottom strake is magnum/cigarette.
#19
Registered
Thread Starter
by shaving off the step and shortened to 10”. Obviously the builder was aware of the splash laws lol
if top banana can get me some measurements then we can be able to tell for certain. I would need strakes width and the last bottom strake distance between it and transom
Last edited by numberonemarine; 10-10-2019 at 07:17 AM.