Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Cobalt (https://www.offshoreonly.com/forums/cobalt-251/)
-   -   Cobalt 343 (https://www.offshoreonly.com/forums/cobalt/174859-cobalt-343-a.html)

stainless 12-12-2007 06:24 AM

look at post 16 . he stated mid 80's with more left on a 575 boat

stainless 12-12-2007 06:26 AM


Originally Posted by Lofty (Post 2365149)
We have a friend that keeps one here in the Bay Area and runs it mostly on the Delta and Bay. I've got some good seat time in the boat in varying conditions. He's got 575's in it and the best I've seen for speed is mid 80's. I think it's got more left but on the bay you just can't run it harder. We like the boat and my wife loves it. Comfortable and stylish.

check it out

stainless 12-12-2007 06:30 AM


Originally Posted by TomFTM (Post 2366140)
No problem.. I think we all were suprised how fast you were going...

this is from someone who actually saw the boat run ..not just theorized on a computer

Canada Jeff 12-12-2007 07:16 AM

1 Attachment(s)
All I can report is what my cousin's runs. mid 70's with 525's. This boat was new last year. 5 blade Maximus props, sorry, don't have the pitch. When I ran her, I could only get 70 mph. These are numbers from the GPS nav unit mounted on the boat.

He knows a little about speed boats too running these for the past 10 years

stainless 12-12-2007 07:26 AM

i know brett from bblades very well we've discussed props on different boats extensively.. he sent me a set of un labbed maximus 5 blades to try on the 343 and we found that mine actually ran better with the bravo ones. as stated previously diff boats .. even with the same propulsion can vary quite a bit what i'd really like to try is a set of cnc 5 blades

stainless 12-12-2007 07:28 AM

sweet boat by the way

haulinvols 12-12-2007 07:34 AM

1 Attachment(s)
Ummm, are we really having an argument about a Cobalt? You can tell winter is here.


We had one here at the Tennessee River Rally last year. Good looking boat that ran very well. It had 525s and seemed to do just fine. It was the first one I had seen up close.

I have no idea about speeds. He started off strong but then hung back. I did not see him after the first card stop till the run was over.

stainless 12-12-2007 08:38 AM

good point :D

stainless 12-12-2007 03:34 PM

according to todays "someones been naughty in P1 " post 525's can dyno at 560 to 570 hp... hmmmm :cool-smiley-011:

blownincome 12-13-2007 05:39 AM


Originally Posted by drstevethiele (Post 2367932)
blown income , do you remember what props and what rpm's the 600 boat was running?

32 bravo 4 blades labbed 5200 struggled to make 80 needed some more prop Dial in also a low water pickup (hull mounted) tended to starve for water at that speed


All times are GMT -5. The time now is 10:10 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.