Chine walk ?
 

Are any of you experiencing any chine walking?
as i said in another thread, i have a 2005 27 pr powered by twin merc 200's. As soon as i hit 52 MPH i start to experience chine walk. just wondering if any other concept owners experienced this? and if you guys found a solution.

Thnx

definietly a prop issue, I have a 30 and have no issues with chine walking, I am pretty sure my props spin out, I have 23P Mirage but I will be switching to 22P bravo 4 blades winter

also join the concept facebook club, you'll get some better answers over there

Pete280 ... what WOT RPM are you getting on our setup? top speed?
thanx

Is there some play in the Steering. Had this happen to me one time on a boat. Seemed to chine walk, found out I had air in the lines and the motors moved a small amount while running.

my motors are on the top hole, I think my tachs my read slightly high because I have seen 5900 or so, the motors are supposed to hit the rev limiter at like 5800-5850, I have seen 65.5 as my best, typically 62-63, I should drop some rpm when I go to 22P, 4 blades this winter