Looking for a shop
 

I have a 1993 Profile, twins, 31'. IN the past years I have had the interior replaced and exterior painted from rub rail down. The boat is red with black background. So far the work is awesome, flames on the side are incredible, no one believes it is a 93' boat.

on the deck and in the cockpit the glass is black and has several places in it I would like to have reworded, mostly spider cracks for rework, but I want to change the black to white, that will require removing the interior, dash, and shooting the boat...

I need a shop that can do this WELL. I sent the boat to Profile after a bolster seat cam lose at high speed and REALLY messed me up, and Profile slaughtered me with extremely poor work, everything had to be redone. SO now I am looking for input form guys who have good experiences in different places.

Any ideas? THANKS!!!

Re: Looking for a shop
 

Check out Bruce Jones in Port Clinton, Ohio. Did some nice work on my 382 and I believe did Expresscat39's "Pure Adrenalin".

Re: Looking for a shop
 

If north of Atlanta is not too far I can take a look at it for you.

Re: Looking for a shop
 

rbr2328, I am around the corner from you and need to have some work done. If you are interested in stopping by to take a look, the boat is inside. I am on Ventura drive at the intersection of Pilgrim Mill and Antioch.

Todd Howerton
Outlaw Disc Brakes
770-844-1777

Re: Looking for a shop
 

I would be calling glassdave.. I have seen first hand several boats he has done.. he just did sean H's spectre and it looked great, also did alot of custom trick glass work

Re: Looking for a shop
 

Todd I will give you a call tomorrow.

Re: Looking for a shop
 

bruce did my boat as well as my dads top gun today he was in our shop repairing a 38` donzi he is the best. i`ll post pics