removing swirl marks ?
 

Am i doing something wrong with my portor cable buffer.I'm using wax frenzy or meg. and i keep getting swirl marks on the boat.To fast of speed,to slow,or the wrong pad which s the black pad.Can someone school me on buffing and waxing ?

Re: removing swirl marks ?
 

Make sure you have a cloth pad on the rubber backing :D

Re: removing swirl marks ?
 

I just bought the pink Zainos Bros. wax for clear coats.... Havent used it yet but it came highly recommended by Offshoredrillin. I have used the blue Zainos on my cars and boats and it worked AMAZING!!! You might have the wrong pad... sounds like you need a finishing pad for the swirl marks.

PM Offshoredrillin....or GlassDave... they are the experts.

Re: removing swirl marks ?
 

Thanks i'll call me and wake him up now. :D

Re: removing swirl marks ?
 

I used Mequires 'Swirl Remover' as the final step when I buffed my boat out.

Re: removing swirl marks ?
 

check pm

Re: removing swirl marks ?
 

That's what a couple people have told me.I'm gonna try it but now i have to wait for the PPG rep to do a few things.I'm gonna try it on the truck first and wait to see whats going to happen with the boat.Hope they fix it by removing all the clear and redoing it.we'll see.Thanks

Re: removing swirl marks ?
 

Thanks and i'll call you tomorrow.

Re: removing swirl marks ?
 

I have used the black foam pad with excellent results but as always, make sur the pad is CLEAN and fairly new, inside w/o sun or dust moving around ,paint or clear is cured throughout (hopefully not Imron or AwlGrip) min 3000rpm, but don't overheat. I use a spray bottle w/ distilled water (tap water has mineral contaminants that will CUT) to keep surface cool when appropriate. The others suggest polishes that I haven't used...yet. G$

Re: removing swirl marks ?
 

I'm using the black foam pads but havn't tried the water thing.The clear is PPG but not happy at all with it.Not if it's the clear of the person the sprayed the clear on my boat.Thanks