Offshoreonly.com - Deck to Hull ?

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Detailing, Painting, & Fiberglass (https://www.offshoreonly.com/forums/detailing-painting-fiberglass-167/)

- - Deck to Hull ? (https://www.offshoreonly.com/forums/detailing-painting-fiberglass/120953-deck-hull.html)

jhiguy377

01-22-2006 09:39 AM

Re: Deck to Hull ?

i've normally removed all screws and rivets then replaced them w/ss
bolts with aluminum backing strips ( yeah, 80' of backing strips) with nyloc nuts; good luck - jeff

Audiofn

01-23-2006 08:20 PM

Re: Deck to Hull ?

Quote:

Originally Posted by jhiguy377

i've normally removed all screws and rivets then replaced them w/ss
bolts with aluminum backing strips ( yeah, 80' of backing strips) with nyloc nuts; good luck - jeff

IMO I would go all stainless. If you do stainless and alluminum you will get galvanic corosion.

Jon

All times are GMT -5. The time now is 11:01 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page